Viewing all customer Discussions for:

15-188 Pivot Lock Shoe, 1/2" Thick, Blue Brake

These are pics of a pivot bar that I need for an Alliance window. It looks like a pivot bar 26-316 but not sure. I also need 7 or 8 "shoes" for the windows. How do I know what part number they are? Windows are probably from 2003-2004. Bought the place in 2005. Thank you!

Tilt latches sizing top length is 2 7/8 Depth is 3/8 top width is 3/4 Balance shoe Length is 2 1/8 width is 1 1/4 Depth is 1/2

Can you please advise on the part number for this pivot shoe? Thank you

The metal part that looks like a C broke in half

window spring and rope broke and window wont stay up and for part number is U B 29G

The length is 30" It has square foot. Window size is 2/8 x 5/6 I need parts for 3 windows. If you don't have square, I would to replace with round.

The windows are at least 20 years old. AlSide Geneva double hung tilt-in. I have plenty of pivot rods. I just included the image to show how it locks into the shoe. I cut the vinyl per your video to remove the Pivot shoe. It measures 9/16" deep thick until you get to the pivot point then it is 5/ ... (cont.)

I have older vinyl replacement window who's sashes and frames are in good shape but many have broken pivots shoes. Many window won't stay open. Before I consider the cost of replacing windows I thought I could replace shoes or even balancers. Thanks, Tom

I'm curious if this is enough information to order replacement parts. I believe they were manufactured for Alside window systems. Most of the pivots are broken and are stuck in the sash. The pivot shoes are fairly disintegrated. The property was wife's parents, recently passed and is in upstate NY, ... (cont.)

Need a few of these.

Hello,I am so happy to have found your site and hope that you can offer replacement parts for my older windows. The windows are still in pretty decent shape, just a pain to clean because of damaged parts. I do have someone who is going to assist with replacement now we just need the goods. The windo ... (cont.)

This part of my window is broken. I cannot pivot the window. I also need the rubber strip that goes on the bottom of the window

I have a window with a broken tilt shoe. The unit is connected to a spiral balance. The shoe appears to be broken. I was looking at the 15-188 as a replacement. It looks closer than anything else I saw. Thw balance measures 17 inches and 5/8 diameter and has a blue tip. Recommendation. ... (cont.)

What causes the spiral balancers to pop out of the pivot shoe? I just bought this house and a couple of windows needed this repaired. Looking for advice to ensure this doesn't continue to happen.

Need: (2) 3/8" x 25" green spiral springs for Quaker "Alex", hard to read but appears to read EU H 3 printed on side (2) shoes

I am not finding any markings on the windows or parts, the spiral balance is 5/8" x 23" in length. The windows do tilt in, as you can see a couple of pieces fell out. Can you please help me identify a replacement part.Thanks for your helpChester

It is 1 1/4" wide and 2" long

I believe it's the plastic shoe that slides up and down and holds the window up with a spring

Hello looking for replacement parts for this window. 5/8" thick unsure of exact width since I'm not able to get them out of the window right now.

Looking for the correct pivot shoe to order. Approx 9/16 depth and 11/2 width track