Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

32E Channel Balance. 32" tall, 9/16" wide, 9/16" deep, sash is about 28 pounds. Trying to find the balance you'd recommend.

Need to order 30 each

Hello I need to replace 8 of these in a home I bought. Could you help me match them up. They are 34 inches long in a non tilt window.

Hello...I need replacement window tilt sash channel balances 25 3 GX CMC 4 H. Thank you for help to find proper replacements for the original balances.

I need the end of the counter balance, the tilt latch and not sure where the other pieces came from. Thanks

I have a balance spring that is almost a Series 795 34D but where yours has a tab with a hole mine has a "V" clip that attaches to a hole in the frame. See photo. Do you supply with a "V" clip?

Hey all, first time experiencing this issue. We have a short-term rental and people are sometimes rough with the place. As a result, both of the main windows in the small apartment have come off their springs. The window was still in its shoes but I can't get the shoes reattached to the springs beca ... (cont.)

Hi- I recently ordered several 34" channel balances and 1" shoes. When it came I realized I need hooks to attach the balance not the screw in that was shipped. Do you have the same balance with a 1" shoe and hooks? The ones I ordered also came with 1.25" shoes but I ordered 1" as I didn't realize th ... (cont.)

Hi There, I'm looking for 2-24" window springs That come with the window connectors attached. I've attached a photo Thank you for your help Josh

Hi, I am looking for a few sets of channel balances for our Pella windows. The shoes that the terminal pins lock into break away from the metal channel. They measure 26" without the hook or shoe.

can I get the 15-194 shoe on this balance?

I need 4

These parts broke - can I simply buy the shoe? Need the model number and if you have them available. Nicholas

I placed a custom order previously and I need the same parts. I actually need 8 of the set up. I attached the previous custom order. The part is 28C Series 795 with a 15-194 shoe and 15-198 top hook. I also need the plastic clip that is on the top of the window. I have also attached a photo. I ... (cont.)

I need 2 balances - part number S795-26 ... option 26c with a clip 15-198 attached.

I'm trying to track this down

I purchased some replacement 1-14" Lock Balance Shoe, Open Cam for existing balance. Measure 30 inches, stamped 30B. There is an indent at the bottom of the balance that won't allow the new balance shoe to pivot on the post and snap into place. Would you tell me the correct shoes that I need. Al ... (cont.)

As you can see, my channel balance has a hook at the top. I have ordered the 795 30B channel balances and installed them using a screw I had at home. Needless to say, the screw has popped out and the balance disengaged. What would it cost for two 795 30B channels with a hook and also four 795 36B ... (cont.)

Bottom part that fits into balance for bottom right of window pane broke off when attempted to tilt window to wash. Photos show the left side with part intact. Home was built with the windows in 2005. Also have three windows with balances that are not working so unable to raise & lower correctly ... (cont.)

I moved into this house recently, and while the windows don't have an identifying sticker, I see a box upstairs that has some screens in it and it has an MW Windows label. This house was built in 2005, and I believe these are the original windows. I have two windows that have some issues, but I THI ... (cont.)