Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

I placed a custom order previously and I need the same parts. I actually need 8 of the set up. I attached the previous custom order. The part is 28C Series 795 with a 15-194 shoe and 15-198 top hook. I also need the plastic clip that is on the top of the window. I have also attached a photo. I ... (cont.)

I need 2 balances - part number S795-26 ... option 26c with a clip 15-198 attached.

I'm trying to track this down

I purchased some replacement 1-14" Lock Balance Shoe, Open Cam for existing balance. Measure 30 inches, stamped 30B. There is an indent at the bottom of the balance that won't allow the new balance shoe to pivot on the post and snap into place. Would you tell me the correct shoes that I need. Al ... (cont.)

As you can see, my channel balance has a hook at the top. I have ordered the 795 30B channel balances and installed them using a screw I had at home. Needless to say, the screw has popped out and the balance disengaged. What would it cost for two 795 30B channels with a hook and also four 795 36B ... (cont.)

Bottom part that fits into balance for bottom right of window pane broke off when attempted to tilt window to wash. Photos show the left side with part intact. Home was built with the windows in 2005. Also have three windows with balances that are not working so unable to raise & lower correctly ... (cont.)

I moved into this house recently, and while the windows don't have an identifying sticker, I see a box upstairs that has some screens in it and it has an MW Windows label. This house was built in 2005, and I believe these are the original windows. I have two windows that have some issues, but I THI ... (cont.)

I need to order this part. They are breaking Thank you! I can send better pic if needed.

We have quite a few of our single hung windows in our house where the channel balances have "popped" as these guys have given way. Measurements are approximately 1" wide and and about 1 7/8" tall. The windows are in a Ryan Home - I don't know the brand of windows. I think the actual springs are f ... (cont.)

Please help me to.know what part to order . I would like to get the complete channel spring and possibly several to keep on hand . My handyman removed this one and will be installing the new ones.Thanks Bill

We have a customer with a MW window size 3/0 6/2 single hung vinyl window made in 2003 we are trying to locate new balances for them, they are the block and tackle style. We will need 6 total balances to do 3 windows the same size. Any help will be greatly appreciated. thank you

2 separate balances Hope the images with measurements work. Let me know. Thanks,

Pella Tilt-Window, I need 2 complete Channel balances, marking is "26C". There is a hook on the top that attaches to the window frame interior. Bottom is a 1" wide Pivot Lock Shoe (closed back - green insert). Channel is 9/16" x 9/16".I also need 2 additional 1" Pivot Lock Shoes (closed back-gree ... (cont.)

The reason I am ordering is because current balances are not strong enough and sashes are slightly slipping down when opening. I will need to replace with the next size from 32-B to 32 C and from 20 C to 20 D balances.

I need to order two of these balancers

Grey pivot part on left side damaged. Bar in good condition. Other pic is window information need to know if Grey pivot part able to get . if enough info

I have a number of windows in my home in need of replacement sash balances. The home was a new build in 2004, and the windows are double hung, wooden sash, manufactured by Bonneville Windows that became defunct about a decade ago. Many of the windows now have broken cords, some are extremely diffi ... (cont.)

This balancer is broken. The frame is bent a the bottom near the pivot lock shoe, Also there is a riot that hold the bottom of the spring near the pivot lock shoe that is also non operational and has pulled out. The pivot lock shoe itself is also showing damage. The top side has damaged plastic hard ... (cont.)

I could not find a brand on the window. I need 2 latches and 2 cams

need to replace rope and tilt window latch