Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

The pivot shoe in the picture cracked underneath. So I need a replacement. Hope hoot is clear to indentify item.

my single hung tilt window sash balance assembly had fallen apart. The tilt guide at the bottom has come apart, the rivet pins that hold the spring and tilt guide (shoe?) have fallen out and internal pulley eyelet for spring has broken. I'm attaching photos. The sampling on the side is 34-B. chan ... (cont.)

See attached pictures of "end" we need for balance we have.

need to order one of these

This is a 28" Channel Balance (plain channel). As best as I can tell it's the Series 795, but the shoe looks different on mine than your illustration, so I wanted to check. The shoe has split and the metal clip it housed fell out. Since it is riveted into the channel, we are assuming that we w ... (cont.)

It looks very much like the 795 balancer with a 36" x 1/2 x 9/16 channel except the plastic pivot shoe on mine is only 1" wide and yours show a width of 1 1/4. I could probably cut that down to fit but wondered if there is another pivot shoe that is 1"wide?

I am looking for these parts. Are they available? I need at least 6 balances and 3 sets of tilt locks.

I believe that the 795 Series in a 28" length will work for our windows; however, I am unsure of the pivot shoe width. The one we have is 1" wide. Is the pivot shoe on the 795 Series also 1"? Rose

I need to order (2) Series 795 channel balances with 15-194 1" T-lock balance shoes and 15-198 clips but don't see this part #. This is for a stamp option 34C

The channel balance I need to replace is 28" and has 28F P1 B61 stamped on them. Can you supply these. Thanks Jerry

I

Does your 28" Series 795 Channel Balance, Product Code: S795-28, come with a 1" wide balance shoe or a 1 1/4"? My current is approximately 1" wide and 13/32" (3/8") deep. My Balance is intact and operating, it's just the shoe that was broke. The channel the balance goes in has opening of 3/8" wide ... (cont.)

How can a I order a 795 series balance with a 15-194 shoe with a 15-198 balance clip? Looking for qty of 2. Thank You

Looking for tilt shoes, no name no #'s. Appears to be similar to15-194. Measures 1 15/16" by 15/16" by 1/2". Any suggestions? Thanks for the help.

Can you help me identify a replacement for this pivot shoe? I need both left and right . I greatly appreciate any help. There are no names or numbers on the part. I have enclosed pictures of the part installed, top view and reverse view. The part is approx. 2 inches long by 1/2 wide by 1/2 inch deep ... (cont.)

Hello, My windows are from Bonneville they changed companies and it is very difficult for me to get any parts, I attached 3 photos of my balance, it measures 33 inches to from plastic to plastic ends and it 9/16ths wide any help would be great! I need like 10 pieces

Looking for tilt shoes. They attach to the end of a standard channel balance and are marked with Pat # 4610108. Used in a new construction vinyl double hung widow.

measures 2" tall, 1/2" wide at the top and about an inch at the rounded end, the only numbers on it are patent numbers 4610108 . the window it came out of is only a few years old, couldn't find a brand anywhere on it. PAT 6,679,000

Hi , Just receieved my shipment of 795 Channel Balances 36"" These are for Patriot 2862 windows tilt in model.Pivot shoes look almost identical but seem really tight in the window track when I replaced them. Having a hard time getting the window back into the shoe. These pivot shoes seem like the ... (cont.)

Hi, the t-lock balance shoe 15-194 looks just like what I need. It broke off in the channel. Can you please tell me how to replace it with the new one.