Viewing all customer Discussions for:

15-198 Balance Clip Attachment

Looking to repair myself but need the proper part. Need at least 3 of these, maybe 4.

Window(s) are believed to be M&W circa 2005. Then are single hung with tilt. The two small parts pivot and attachment around pivot that balance spring attached. The balance sheathhas number 34C pl BSL or BS1. Sash will not stay up and I need 8 of each.

I have a 795 with a hook at the top, instead of a screw. My concern with using the screws is determining what kind of screw to use and if using the screw plug and screw will in any way affect the window function. These are tilt single hung windows and I just want to make sure that all functionalit ... (cont.)

I need two of the S795-27, however the top of my existing window balance has a 15-198 balance clip attachment instead of the standard one. Do you have a part number for this configuration or can you make these for me?

Looking for balance for Hurd single hung window with tilt sash. Attached are the two photos. The number on the back side is 27B BSI RN. I need two of these.

Hi Swisco - thank you so much for offering this service!! The channel has imprinted "33B BSI TH" The Shoe has imprinted "Pat #s 6,679,000 // 4,610,108 // D467,490" The clip at the top of the shoe gave way, releasing the channel/spring from the window sash. The channel/spring appear to be in fi ... (cont.)

This channel balance was broken and flops out when the window is raised, and the cord is always loose. I don't have access to get better pictures right now. I know these aren't great, but wondering if someone can point me in the right direction to order a replacement for next time I make it to the p ... (cont.)

Need to order balancers for tilt sash windows like in the photos. I did find something similar but the top of the balance is different from the one I need. Do you have anything that has the hook like mechanism thing at top?Thanks!Kristine

I have a window that is 51 1/2" W x 60 3/4" H. My window balances are broken and I need to replace them. The Length of the balance measures 28" is 1/2" wide and is ribbed. I have attached photos to help me identify parts. This is a tilt window and should be in the S750 or S751 series. However , ther ... (cont.)

Pic-1 1705 shows the old channel balancer 28" with a groove at the tilt shoe end --- which makes it unsuitable for the 15-194. The S795 28 is the recommended replacement with a 15-194 shoe to be swapped with the shipped shoe. Ordered 2 each However there is a significant difference in the top hoo ... (cont.)

Windows are from Builders First Source in a Del Web home in Houston Texas. Markings 27B see attached photos

I ordered item number S 750-28 as you can see is the wrong one The length is good- the thickness is not- mine is like 1/2 inches and the 2 end are different. Please let me know what?s the right item number.

The indentation on the 26C balance stops the ability to attach the new shoes.Last week I purchased 6 balance shoes 15-194 for my channel balance 26C for a MW manufacturing single hung tilt window. I thought that this was the right shoe for these balances. They fit (1 inch) but do not attach because ... (cont.)

Stamp on the balance is 32C. Have already repaired and replaced a couple; this one cannot be repaired.

I have a 26F BSI balance and need to replace some of them. I don't see a listing for these on the website, any ideas?

I have a dual balance low e-window. One of the balances broke and I need to replace it. The working balance measures 32inches long, 7/16 width and 7/16inch depth. I can't seem to find a balance that meets the same specs. I have attached 3 pics of the good one. Thanks for your help. Respectfully; ... (cont.)

when closing the lower window if heard a large snap and the balance flew out onto the floor. The company in Rocky Mount called it a balance and recommended that both be replaced. Can you help identify this part? John

Hi, can you help me identify the correct replacement balance? Thanks

Looking for this part. Window balance with spring and all plastic parts. I believe its from a M&W HM manufactured 2006 window. bought out by ply gem. Window is 71 inch tall. I cant find the model or any serial numbers. Seems all stickers where removed. Thanks

My block and tackle balance is 28 inches long and stamped 28B but the top end has a 1/4" wide hook attached to the string. The hook engages a 9/32" hole near the top of the window channel. >> Do you have a model with a hook or do I untie my hook and use it? My "pivot bar" also looks diff ... (cont.)