Viewing all customer Discussions for:

26-378 3" Pivot Bar

Coils have a #5.0 and 35 on them. The coil supports are 4 inches tall. I will need numbers for coils, coil supports, pivot shoes and pivots if bar. thank you

I have at least on that is broken. Please let me know where I can find a replacement.

Need help with this window coil balance. Some of my windows will need to replace those parts. I will need the entire set.

Could you please help me find the numbers for the replacement parts that will work with simonton Windows. The springs are 5 lb each.

Ok don’t know the manufacturer but it’s a double coil with markings #5.0 35” P5232208 see picture.

A tall American Craftsman vinyl double hung window installed 2011. Believe need 2 pivot shoes and the stops with the coil springs that attach to them. Also looks like the bottom right pin which goes into the pivot shoe is broken, is that replaceable?

The marking near the tongue of the spring coil is #9.035" can you identify the parts I need to fix the bottom sash? thanks anthony

Hoping you can offer some guidance. Struggling to find replacement pivot bars for our Plygem Double Hung Windows. Any assistance you can offer would be great appreciated.

Hello. I have a window sash that needs to be repaired. The brand and model is Simonton Impressions 7300. The coil is 1/2 wide and the sash weighs 19lbs. Could you help me identify the parts needed to replace the coil, shoe, and pivot? Thank you

Could you please help me to identify what part should I need. Simonton window single hung, both sides tilts latch and pivot bar (also missing the screws) and pivot shoe and spring

Please e-mail to me part numbers of replacements of pictured window balancers. Thank you

I have 30 windows that are in need of various parts. Pivpt Bar, Pivot Shoe, Coil Bal. Cam lock, Tilt Latch they are all the same style window. I have included a photo of the ID tag I would like to place a parts order Thank You Jud

Broken pivot. Please identify part

window coil spring broken. waiting for jam spreaders to remove old parts

Hi, pls refer to the picture attached and advise which part is this and also the part that needed to hold the operable window.

I usually order the Certainteed blocks for this apartment complex I do maintenance at. This is a new style I've come across here. Per chance would you have these parts? Thank you.

help find this

Could use some help picking out the right coil spring

Simonton single hung window installed in May 2000. Coil is #6.5, two coils on each side, need 2 balances (1 window).

I need to replace the 3 spring coil and pivot on a few windows but not sure how to know the weight and the parts