Viewing all customer Discussions for:

S385-33 33" Series 385 Channel Balance

Identifying numbers printed on the unit: 32-3 FA2 CMC 19The metal channel is 33" long, the back of the channel is 1/2" wide, the open side of the channel's slot is 9/16"One side of the window is also missing the little clip that pops out to catch the channel balance so that it can be removed. Fortun ... (cont.)

I need four of these channel balances Channel balance - 32 4 CX CMC 7

Hi,The subject item on one of our windows has broken and I am looking for a replacement in pair but having trouble to find the right part. The house was built in the late 1990/early 1991. Please take a look of the part number (32 3 JJ Caldwell) on the first photo (track1.JPG), which I can't find in ... (cont.)

im looking for new sash balances. They are for a window that it approx 45 pounds, the ones that were installed are too weak and the spring broke. The number on it is "3240", so i would need the next "step up" for weight, these were replaced before and failed. The channel is 9/16 wide, and 5/8 deep, ... (cont.)

Hello , Can you please help me to find a replacement for my Caldwell Channel Balance. The channel balance measures 33 inches long and the stamp on the balance reads 32 5 GP Caldwell. The balance top on this channel has a groove in the middle.

Hi there, My window had recently broken due to one of the balancers string not working. It would be great if someone could help me find the correct replacement balancer for my window. All of the specs and information will be listed in the photos. Thank you.

Hello Friends, could you please help me to identify part number of channel balance 33" long, 1/2 " with shoe and top according to pictures which are type S 385 that you have in stock, but that are similar to part 3265 that I have in my windows.

I have a Milgard aluminum window. The balancer marking says 32 3 HJ Caldwell on it.The metal portion of the balancer is 33 inches and 1/2 inch in width.Glass in window is 19-1/4 X 33 and outside frame of window is 35-3/4 X 22Like to replace both balancers, all attachments and purchase the rivet to ... (cont.)

32 4 LN CALDWELL

Looking for replacement channel balances for our non-tilt vertical sliding windows. The length of the metal is 33". The number stamped on the balance is 3230.

Would like to replace a broken channel balance. Builder used Alpine window. Window # 152-502153 Channel balance # 32-2 BH5 CMC 75 I don't know what would be the SWISCO number.

Hi,I went to Home Depot for a sash replacement and they directed me to you for help getting one of my windows fixed.Can you please help me?Thank youFred

Hi there, These are stamped as 32 3 DR CALDWELL. Any suggested product(s)? Thanks

The Caldwell channel balance is 33" long (metal only). I would like to order two replacements.

What part should I buy? I need to buy replacement channels for my vinyl windows. They are single hung, non-tilt windows. Each sash weighs 21 pounds. The guide have wings. The bottom winged guide measures 1 inch. The length of the channel aluminum part only measures 33 inches and the width measure ... (cont.)

Hi, I'm looking for 32-3-GP Calwell balance replacement. Could you please suggest replacement parts?

Hi, I need a replacement channel balance. Photos attached of the 'partner' side. It is 33 inches and I believe the stamp is 3250. Just not sure which series. Thank you, -doug

What a great site! Hopefully you can help me. I suspect one of the balancers has been replaced before. One is stronger than the other and the window needs to be giggled side to side to get it moving upward. The window weighs 30 lbs. These are the numbers on the balancers. Left- 32 5 FW CMC 10. Right ... (cont.)

Window balancer

I am looking for a replacement window balance. The string on one is broken. The specs are 33" length Window balance: stamp shows 32 5 LU CMC 1. Width is 5/8". The winged attachment measure is 1-3/32". On your website, there is a 33" series 385 channel balance option 3250 looks like it would work ... (cont.)