Viewing all customer Discussions for:

15-210 Corner Locking Pivot Carrier, Black

Looking for replacement shoes and can't find any markings on the window.

Milgard double hung tilting windows. Purchased in 1999. The part that slides in channel is broken on ne side of upper sash. Milgard gave me a replacement part number of im0551mi. I can't find part. I've added photos. Do you have replacement?

Sent some photos as requested. The insulation is the same size as the part number previously mentioned, but appears to only have one rib instead of two. The pivot shoe is the same size as the part number previously mentioned - 2" x 1 1/4" x 9/16"

I need to replace both channel balancer guides and pivot shoes. Pivot shoe 1-1/4" wide and 9/16" deep Channels are 9/16" wide and 1/2" deep Markings on channels 17 5 B21T CMC. Window weight 15.2 21 5 B21T CMC. Window weight 16.2 Thank you Adrienne

I am looking for these

do u still stock metal piece for slide window

Hi,I need to replace the channel balances but don't see an exact match. The size is 20 inches length, 1/2 wide, 1/2 depth. They are screwed directly into the window frame at the top. I sent several photos from different angles.I should add there are no markings or numbers anywhere. And here is a ... (cont.)

The Corner Locking Pivot Shoe was the recommended replacement for my tilt window. After doing a cut out, I was able to correctly install the shoe and attach it to the channel. It worked great. On the other side of the window, this shoe would not fit even with a wider cut out area. I wedged it in, ... (cont.)

I am looking for replacement pivot shoes and balances for some older vinyl tilt in replacement windows. I have attached some pictures of the items. After looking thru your website I am thinking 23 Series 770 Balance may be the correct balance. The spring is on the top and the cord mechanism is on ... (cont.)

for the pivot shoe i think it is 3" Pivot Bar, Weathercraft 26-272 ()any other way verify? because it uses "Tamp R Lok 3" this narrows it down to two choices? 15-231 or 15-210? can you tell from photos? no real way to verify without trying to remove original? - BTW is there any info on how the tamp ... (cont.)

the brand I guess is mm

Balance Spring is 25" - Red tip - Sash weighs 18#. Please advise with correct part numbers. Thank you

Hello, I need to replace several balancers like the one shown as well as the shoes. Hoping you can tell me what the part is and have in stock! :) Also, do I need a jamb spreader to get the new shoe into that channel? seems pretty tight. My property is in Hawaii and this window is ocean facing so ho ... (cont.)

These parts came out of my Milgard windows that were installed in 2005. As you can see they are broken. Can you help me. Thank you.

See photos:Latch dimensions: 3 1/4" x 1 5/16" x 5/16" H SHOE dimensions:2 1/16" L1 1/4" W1/2" HSash balance dimensions:Rod 28" Red rod typeRod width is 9/16"

A friend here in Florida needs several new pivot shoes. The windows have 21" black tip spiral balances. The windows are hurricane compliant with Very heavy IG units. As you can see in my photos, the shoe is the drop in pivot bar type style. Your 15-015 shoe is the same size as these. Do you hav ... (cont.)

The shoe is for a tilt-in window. The size is about 1 1/2 wide x 2 1/4 long.

Need 2 20" metal channel 19 9 E04T CMC

These are Milgard double hung windows installed in approximately 2002. The first picture is of the lower window part which is still functioning properly. The second picture is the upper window where the piece has cracked. I'm not sure how to identify the proper part I need. Thank You. ... (cont.)

Could you help me understand if the window channel balancers can be replaced? It is a double hung tilt window about 17 years old, from a company called AirChek in NJ. The channel balance length is 19 and it says 19-5. The top sash still works but the bottom does not. I can see there's no white c ... (cont.)