Viewing all customer Discussions for:

S140-08 8 lb Series 140 Quick-Tilt, Single

Can someone help me identifying a replacement balance.

Need a replacement, don't know part number or name.

Hi can you help me on this puzzel, my window coil balances are broke and window drops. I tried my best to take best possible pictures. coil balance mentioned 8L/8R on it. Please let me which are the right parts to order.

Hi Swisco: I am trying to get directed to the best replacement part. I have an Accu-Weld 2300 window, double hung sash with a broken coil balance, right side, on the bottom sash. I will be ordering and replacing both left and right coils so they match. The bottom sash weighs 15 lbs. The attached pic ... (cont.)

The left coil balance has an 8L marking and the patent number 6,378,169. The right coil balance an 8R marking and the same patent number. The pivot shoe has a U shaped opening the bar and attaches to the coil on the inside.

right side coil lift broke into 3 pieces & broke coil cover. F8 PRINTED ON COIL STEEL NEAR ANCHOR POINT. i WOULD LIKE TWO NEW MATCHING UNITS.

I believe I need 8lb Series 140 quick Tilt. Not sure if I need the single coil or double coil blocks. My window is 34 x 53.The inside depth is 5/8" and the inside width is 1 5/8" Thank youGreg G

The sash weighs 13.2 lbs. I need all 4 pieces inside of window slide track.

I need both sides of window

Hi, I got 2 broken window .Can you help me to idetifying parts

Looking for a suitable replacement for the pivot lock shoe or the entire balance spring/pivot shoe unit as well as matching pivot bars for a Sears (Accu-Weld) window manufactured circa 2002. Pivot Shoe is 9/16" thick, 1 1/4" wide, and 1 1/2" tall T-bar pivot is 5/16" wide, 13/16" thick and is 1 3/ ... (cont.)

Hi. I ordered a spring from u guys but I ordered the wrong one. The one in pictures is what I need. I need 4 total. That is 4 of the top parts and 4 of the bottom parts where the pin pivots in. I also need to return the incorrect part. Also, my window is 15-16 pounds. I hope this helps ... (cont.)

Hi. I am looking for replacement balance coils for our Anlin bathroom window. It seems that this is a 2 part setup and your company seems to come the closest with Part No. S140, but it is not a dual piece setup. I have included photos of the back of the coils that show a marking of '8R'. Thank ... (cont.)

Top/bottom slide window. The bottom one works. The top part with the tail end spring coil balance sticking out always have the top window slides down.

I need to change 4 windows tilt as you can see in the photos. On the bottom window I have the number 7r while on the top window I have just the number 8 printed without neither letter "r" nor "l". I'd like to know which product I have to buy. I have to replace all 4 parts. Last question: do you have ... (cont.)

I'd like to replace all locking terminal or shoe with a new one. The only numbers that I found on these old shoes were 8 and 7R.

Hi, having trouble finding replacement part similar to this. Both sides are broken. Any help would be appreciated. Thank you, Paul

patent 6,378,169 stamped 8 have broken spring and broken notch area https://www.swisco.com/8-lb-single/pd/Series-140-Quick-Tilt-Balance/S140-8 noticed your's has single spring yet is 8lb. very similar, will this work?

I am looking for Tiltout window balances. the only markings is 4+4 the springs have 4's on them. Dims are channel 10/32"Dx1-10/32"W, balance 10/32"Dx1-10/32"Wx4-8/32"L.

Hello, I think your single Balance spring replacement "product Code: S140-8" can be the replacement for my window with a label " AAMA Certification program tag? But I also need the pins that are inserted in the window sides that would fit into the wholes in the spring balances. Can you please help ... (cont.)