Viewing all customer Discussions for:

S140-08 8 lb Series 140 Quick-Tilt, Single

I would like to know if I could order and have it sent to me the next day.

have accu-weld windows series 2100.. need replacement parts for 2 of my windows. the part on side of window that helps them go up and down. looks like a metal gear inside. and plastic part that you push to the side so that you can tilt window down. parts need two of each.

I have a Thermaweld window which was installed in 2010. The window won't stay open. The only information I have is the Coil with a number 8DF engraved on the coil. It is a double hung tilt window. Will 8 LB SERIES 140 QUICK-TILT, SINGLE Product Code: S140-8 possibly fit to replace the coil bal ... (cont.)

Moved into a house with multiple windows broken as seen in the first photo. Determined it to be a coil balance, but it was in pieces when I got it out. I'll be honest - not sure how they got them in in the first place as there is no distinct opening in the channel to pull them out, had to pry out wi ... (cont.)

Hello Swisco Tech, I need help Identifying the correct Pivot Shoe, Coil Balance Spring , & Sash Carrier & Cover. I am thinking this is an 8 lb. 140 Series Quick Tilt, Single. And would need 2 lefts & 2 Rights for one window. The two important measurement are 9/16" & 1 1/4" with the ... (cont.)

Part that holds up the window My push my window upward and it comes down does not stay up

HiI am making my own aluminum single hung windows for my new house and I'd like to try these coil balances, but I have a question: Does each side of the window need to have two coils or only one?The house has two different widths for windows (height is the same 110 cm) and the sashes weight 7kg and ... (cont.)

Coil is broken and need to replace whole balance. I see individual parts on your site but can I get whole balance/shoe as show in this video? https://www.swisco.com/videos/view18

Hi lm Jim. Enclosed you will find shots of the coil housing on my windows. Please let me know if you have these in stock.

Purchased above item from you. Was wondering if there is a video on how to install. Appears to be larger than broken one. Thank you Jackie S.

Hello, long story short, I took the coils and plastic piece out of window to fit A/C unit in window, and now I need to put hardware back in but can't find it. They are sears windows that seem to be unmarked other than some handwritten numbers seen on one of the pictures...I only took the coils out o ... (cont.)

Hello, I have a vinyl double hung window that the balance broke on both sides.If there is anyway you can help id and maybe have replacement parts that would be great. These windows were made by a company called Lifetime Windows, they have gone out of business so I am hoping you have parts that c ... (cont.)

The coil with the cam goes on the bottom of the window. I have that part number, but hat is the part # for the coil without the cam?

Hi, Our bathroom window has two snapped coils on either side. Attached are a few pictures of the part. The stamped ID reads "8R" with patent # 6,378,169.

I need to replace the coil balances on 2 windows. The window weighs 15 to 16 pounds. I think I have identified the correct parts to order (8 lb Series 140 Quick-Tilt, Single) X 4 pcs. The attached photo only shows part of the current coil because the bottom part is no longer connected. Now for my ... (cont.)

I have many windows and they are of the channel balance type and with your help I've repaired them. But this one is different and I'm not sure how to remove window and replace broken part. There is no clip to pop out The window slides up but won't stay up. Please help!!

Only identifying mark on it is :10. R

Debris got caught in the track. Window was forced shut and the metal track bent on one end, snapped on the other. The end is labeled 8R

I have a 33" x 32" window sash on a tilt window. Last spring I installed on the left and right a series 140 #8 coil balance. one broke What coil should I buy?

I have Accu Weld Replacement windows,much to my disappointment. 2 of the positive control balances snapped. They are the dual coil and are marked 8R. Do you have them?