Viewing all customer Discussions for:

39-389 Awning Operator Kit, Long Arm

I'm restoring a house from 1957. It has about 25 windows like this, very few of them still operate, Can they be replaced or restored?

Anderson part #0333908, 15" arms, late 60's vintage Bill

Hi my name is Cindy. I'm looking for a part of a Anderson windows. Built in the 50s... I need a replacement a spline gear. can u help...the first one is in bed rooms and the side ones our front windows. Have to use a a tool to open and close them. By turning the silver spline with a pair of grips, t ... (cont.)

Hello, We have a vintage window in our kitchen that is 39" wide and 34" tall. All I can find of the old operator is the 15" arm that does not have any numbers on it. It just says "Anderson" We looked for some sort of info on the glass corners but all we found was A/W logo with "CV" etched in. No num ... (cont.)

Do you have Anderson Roto Operator part number 0333908 and handle 0536011...this is for an awning window vintage 1973...if so please provide pricing and lead time...I need 2 of each..Here is a pic...15" to center of pin fr bend in arm ... also note it is 4-1/8 hole center dim.... thanks... this wind ... (cont.)

Looks like the right measurements (close at least) but on mine the boots slide in a channel on the sash rather than a rod. Can this replace and does the kit contain all hardware to convert?

I have a few windows where the operator is not working well or the inside is stripped so it won't crank. I need the operator and also the crank but have no idea what kind it is or what I can use to replace it. Thanks, Chad

In my original email I asked if the 39-389 opener would work on my 1960 version of the Andersen window. Notice the distance on the tape from about the center of the swivel gear to the end of the operator arm. It looks to be about 17". When I measure the total distance between the knob on the left ... (cont.)

I am interested in the Swisco 39-389 for an out of production older Andersen 400 awning window operator. based on some of the feedback it looks like it might work, but the earlier posts say to potentially modify the sill - can you tell me if the footprint of the crank is around the size of the old ... (cont.)

Amerock/Roto-Lock Long Arm (15?) for Anderson windows I need 3; after market or used

What would I need to order for a complete install of 39-389? I have to replace a dual arm awning window entirely so would need rod, grease, rod mounting brackets, shoes, controller w/arms (15"), controller cover and crank. All stone.

Hi! I am replacing 2 Andersen 0333908 long arm awning operators. I have 2 questions, please. 1. What is the bracket referenced as being included in this kit? 2. Does the 36-083 shoe kit contain 2 shoes? Please advise, thank you. Steve.

Is this enough information for you to match these awing window operators. We need 8 operators and handles. Tks

This is a awning window Need these hinges please help

The crank post is stripped. Can it be replaced or do I need the whole mechanism?

Hello, I have windows 44 inches wide and 31 inches tall. It swings open 14.5 inches on the present system. the track is about 3 feet wide, and the window is at 34 inches when closed. the arms are 16 inches each, and clip onto the track. obviously, I may have to buy a new track if you don't hav ... (cont.)

Hi. I'm hoping to replace the operator kits on my 1964 Anderson windows. The arm is 15 inches. Product Code 39-389 looks right but is for a later window. Please see attached photos.

Looking for some serious help here!! Do you carry this kind of hardware for louvered windows. 12 windows measure 38 3/8 x 17, and 3 windows measure 29 1/2 x 17. The hardware is a dual arm ( left & right), center mount gear box and rotary crank handle. Color is copper, I would measure the hardwar ... (cont.)

I am looking for a replacement mechanism for an old casement window. The window is installed horizontally and mechanism is located in center with two hinge cranks. I need a new mechanism and handle. Thanks

48" window. Crank base 4 3/8". Rail the arms slide on 36 1/2" push out arm 18" Handle gear is stripped please advise. Thanks