Viewing all customer Discussions for:

26-200 Balance Screw Plug

Lenght 28" 1/4 Part # 28C pb BSI Vynil window. No tilt Please see pictures attached

Wanting to confirm that this would be a 27" D type window balance for the other side. There doesn't appear to be anything on top of the balance, just a string that goes all the day to the top of the window.

My crossbars are 24" and they have a clip that hooks into the frame as indicated on the attached photo. They do not screw into the frame as show in your video. Would it be possible for me to drill a small hole and and screw them in the frame like your video. My windows are MFR. Code: MW-1 Twinsea ... (cont.)

Hi, we are working on replacing spiral window balances in our tilt windows. Our problem is that the place where the top of the balance screws into the vinyl frame has torn out (this happened on a second window as well). In this photo the balance and sash stop have been removed, and the place where ... (cont.)

Single hung window with bottom tilt capability part # on channel balance is 26B , 5/8in wide , 1/2in deep

Hi, looks like you guys can help me but I wanted to make certain you had all the parts. I need the balance and the shoe but I also need the metal piece that comes out of the window. That piece is a 2 1/2 inch long metal channel that is about a quarter of an inch wide and is what fits into the shoe. ... (cont.)

HelloI have series 795 balances 1" shoe with a hook on top! Can I switched it to the standard one with the screw instead?It's 34" (stamp: 34C BSIN 11)Looking for qty 4.

Do I need to take the balance out of the window or do you need more numbers

One of my windows has a broken balancer and needs replacement. The window slides up and down and has the ability to tilt inward. The balancer length (metal only) is 28 inches, and is stamped "28E BSI 30", pictures attached. Do you have a replacement balancer? If so, what is the cost? What is the shi ... (cont.)

Need 25 replacements please. Don't see on web site

I have a window H-R25-46x77. From a previous post in February from Lexington SC, I need to replace with a series 795 channel balancer. Weight of window is 18 lbs. Foot is 1 1/4. Pivot bar is from picture. Top connection is per picture attached. Length of balancer is 28 1/4. Please advise parts r ... (cont.)

Not sure what brand my window is. Could not find a sticker anywhere. Looking for a replacement balance. It's flat,28"long.

hello, While replacing the balances on several windows, this part broke. Its the mounting lug for the top screw that mounts the channel balance. As you can see its 1/4" wide square hole.

This is a tilt window it has a hook at the top that top which inserts in a slot. The bottom has a metal bushing which fits inside a plastic housing with a white plastic guide. The channel has a 27 B stamped on it.

This plastic piece, about 1/4'' square with a slight lip fits into a square hole (1/4" ) for the screw that holds the upper end of the spiral tilt mechanism. This broke so that the spiral tilt does not stay up. Do you carry this? Joel.

I removed the balance spring from a window and now that I am ready to put in a new one, there is no place for the screw to screw into. I think it's missing a balance screw plug. Any ideas?

# on parts 28C, RBSI, PATO4610108

I just placed an order for the S795-34C part I thought would work in my window.I am noticing a few little differences though... It looks like my cam is an open cam and I have a hook for the top. I want to make sure I ordered the correct part and/or see if I need to add any additional parts.Can you h ... (cont.)

I purchased 2 channel balance order number 1384120. I think I need the clip in not screw in. I have uploaded 4 pictures 1 is the hole that the clip goes in and 1 showing how the clip in inserted into the hole on another window and the other 2 pictures are the balance channel I purchased from you.Can ... (cont.)

Can I have the 15-198 balance clip attachment placed on the S795-32D channel balance? Thanks in advance for your help.