Viewing all customer Discussions for:

26-200 Balance Screw Plug

I have MW Windows and need replacement balancers: 4x 28.5 inches and 14 lbs windows 1x 26.5 inches and 10 lbs window 1x 26.5 inches and 18 lbs window 1x 28.5 inches and 18 lbs window 3x 28.5 inches and 16 lbs windows 2x 26.5 inches and 16 lbs window

No part numbers.. plastic square piece and a screw.

Per the recommendation from Swisco I am preparing to order the S795 balance spring to replace the balance spring on my Plygem window. Prior to doing so I need one more piece of information. The current balance spring attaches at the top of the window via a hook into a hole in the window. (see att ... (cont.)

Stamped with 27B and also stamped with OL BSI

Good morning! We built the house in 2004. Hopefully you have parts for the old model. There are 4 windows that have problems. There's no number except one that looks like "pat D467490". Which parts and what kind to buy? Please let me know if you need more pictures. Thank you so much for your help ... (cont.)

The balance widow shoes I received were very close but not close enough to work properly. So I sent you this picture of the window type itself. I also need the spring type slides that allow the window to tilt open and drop down for cleaning.

I need a replacement balance for a Jeld-Wen tilting vinyl window. The old balance has 32D BSI stamped on the square channel. According to an instructional Jeld-Wen video on how to install a balance, this is a Type C balance. So can you provide me with a 32" Type C balance to fit a 4'x6' Jeld-Wen ... (cont.)

We cannot find these anywhere and the windows are not that old. I called a window company and they told me I had to replace the entire window? I have 8 windows that need these pivot locks! Please help! We move in 2 weeks and these need to be replaced. Thank you!

My single hung window. On the right side the piece that the spring attaches too broke so the spring won't stay attached anymore. And the string is very loose.

Do you carry a replacement for this sash balance? The metal portion is 33 inches long, 1/2 inch deep and 1/2 inch wide. There are no visible markings. The sash weight is 22 lbs.

I think I need the S795-30, but I want to be sure I don't need any other parts of accs. to make this work for my system. Let me know what you think. Measured at 30"

Balance channel is 30 inches. !/2" by 1/2" with hook on one end. Sash cam measures

Only making is "32B". "BSI"

Looking to get some parts for several windows in my house. Not sure what type shoes these are and the bar or tension rod. It is 34inches. The one picture shows a metal piece that broke off in the shoe that needs to be replaced. Could you help

I am not proficient using digital devices and appreciate your patience. I have double hung windows and many need parts replaced. Someone I spoke to earlier said to weigh the window. It weighs 14 lbs. We built our house about 15 years ago if that helps. I would so appreciate any assistance you can ... (cont.)

I could not find the same style on line. These are 27" long with a clip at the top. One window had 2-27C and the other window had a 27B & 27C.

We have purchased from you before. Please see the photos attached. Need your help in identifying these parts. Stamp in frame is 27C ID5 CMC 54 channel length 27" channel width and height is 9/16" Plastic piece 1 7/32" wide, 17/32" deep and 1 1/4" tall. And quote $ for 4 pieces.

I need one of these in 27 inch and 2 21 inch. The 21 inch has 21d stamped in it The 27 inch has 27c cj stamped in it

I"m looking for the plastic pieces in the attached photos that the spring/string attaches to. These are in vinyl, single-hung "WM" windows that were installed when my condo was built ~18 years ago. I haven't been able to find any other markings on the windows themselves, other than the "WM" logo o ... (cont.)

Good morning. I need to replace four tilt balances that are marked 34C PN BSI. The current balance has a hook that rests in a round hole in the track. It does not look to me that the existing hole will take the 26-200 screw plug. (I still have the hooks.) What do you suggest? Thanks for your help ... (cont.)