Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

I have two windows with the 3020v 31" and six windows with the 2320v 24" balances. I need both sides in each window. Thank you!Robert

I am looking to replace this channel balancer. The part number stamped on it is q-28-1. It is 29" long (channel only) excluding the top and bottom accessories. Any help you can provide would be appreciated.

Hi, I need to replace 2 broken channel balances which seems to be custom made as I cannot find them in your catalog. Those channel are used for Traco single hung impact windows (no tilt) Metal channel lenght is 24 in. The top seems to be new security 19-041 Shoe seems to be 15-004 Engraved: 23DS ... (cont.)

Can you please help me identify this balancer and the appropriate replacement cams.

Need to replace balance rods. Not sure which to order. 16 inches long. Thanks, victor

I believe I have the same window as described here: https://www.swisco.com/discussions/Channel-balances-23DS-38-Traco-Impact-hung-windows-77-110957 Can you send custom link? I need 2.

need part to fix

Good afternoon, I made a purchase from you back in May for my winter home in Florida. My order # is 1402232, I just returned to my Florida home since purchasing these items from you and it looks like the top and bottom pieces for the balance guide is incorrect. The top guide fits onto the balance gu ... (cont.)

Hello, My window channel balance looks a lot like your Series 350 (S350-23) except that my bottom shoe (pictured) is much more angular than the photos of your 15-004 shoe indicate to me. In fact, I don't see any bottom shoes in your catalogue that appear to exactly match mine. Dimensionally, the tw ... (cont.)

Hi there,went to assemble and the slot on the #15-004 is too narrow to fit over the metal channel end. Thank you, Mike

Window channel balance. See photos attached 34in stamped 3330Thank you Roseanne

I need to replace the damaged window balance shown in the attached photos. Using your website, I believe I eliminated all but the 385 1/2" Wide Window Balance. The specifications on the pictures of the window balance I sent are: Top guide is "winged" which I believe is your 19-005Bottom guide is "wi ... (cont.)

Hello! My name is Chuck Watson and I am need of (2) identical channel balance assemblies. And wanted to be certain to order the correct assembly. Photos of the Channel Balance included. Metal channel (only) length is 32" with stamp 3130. Looks to have "Channel Balance Top Winged 19-005. And Winged C ... (cont.)

Please advise on the correct part to order. This part has imprinted 26 4 HX CMC 11. It is 27 inches long. Thank you.

I need to replace 2 channel balances for my hurricane window. Current part number: 29DS 48L Sash weight: 48lbs Channel width: 9/16" (1/2") Channel length: 30" Channel balance top: winged Channel balance shoe: winged 1 3/32" depth

Can you help me with what channel balance replacement I may need. Printed on the old balance is 1420A. it is 15 inches long. Thanks for your help.

Hello,I am trying to locate replacement balances for my Norandex windows. They were install about 19 years ago. The windows themselves are fine but the parts in the balances are worn and broken.I have contacted a few distributors but they only sell replacement windows. If you think you can help w ... (cont.)

I need some replacement balancers for my non tilt Milgard windows. The current ones have 26 5 IV CMC 8 printed on them - the length is 27" (measured using the example from your video). The ends are also quite similar to the examples in your video - windows are aprox. 20 years old ... (cont.)

I want to replace channels for looks like 2 combinations of top/bottoms

I have 4 windows that need balancer replacements, they are all 15" in height, unfortunately, they do not all have indicating stamps on them, so I am not sure which weight ratings to purchase. The Windows are all Milgard, and appear to be pretty thick double paned glass. The first 2 are 16"w X 17"h ... (cont.)