Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Main problem is stripped Handles. Two left two right .Hinge HG05 2008U is 7.25" x13" Roto is the brand I think . upper hinge 93/4" Arm 71/2" Need screws also.

Hi! could you help us figure out what parts we need for the top and bottom hinges? We would like replacements for both our left and right windows. Thanks for your help!

Awning window operator. I don't know how it's attached at sill

I am looking for an operator and upper/lower hinges for this window. The operator arm is 9 1/2" from roller to bend before crank. The upper and lower hinges have 10" mounting plates with a 5" swing arm. The hinges are stamped with 385-1 R or 1 L according to location at the top or bottom. I believe ... (cont.)

I actually need all of the replacement parts for the truth casement 40887 The crank and the sash dyad are in working order but need to know what else we need for replacement. I am including pictures Thank you for your help! You have been incredible in the past. Hoping you can help us figure this ou ... (cont.)

I have a vertical swing out style window which because of it sticking happened to cause a break in one of the mounting plates in the mechanism that opens and closes the window. I am in Canada and have so far had no luck trying to locate a replacement part. I was given your company name in hopes you ... (cont.)

I need to replace arm and track for this truth casement window made by pella

Curved arm indicates Wright Hardware. approximate measurements: 9 3/8 base plate 4 inches short arm 5 3/8 to 5.5 long arm under window plate 7 inches white handle on the inside what replacement product(s) would you recommend?

Hello. We recently bought a house in Delaware with mostly non-working casement windows. I replaced the operator arm with a replacement for a GU/Silverline operator and they worked great. I need to replace some hinges, both top and bottom, on several of the windows and am not sure what to buy. Based ... (cont.)

I have a homeowner with older casement windows that needs new window crank's and guides. The window cranks are Truth 21550.

Says entrygard truth Left and right side About 23 years old

Hi. We have a truth 30744 casement window crank that need replaced. See pictures, Pictures show the 1 window 2 A good crank installed on a different window And 3 the rusty part we need replaced on a broken window. Please help us order part. Thx

Hi I'm in souther California trying to find these style operators

I have a roto system the hinge plate that screws to the bottom of the window is 6 Inches long and the slide rail is 8.75 " long the part 3 on the arm is a 0P052020. I Need 4 lefts and right hand the cranks should be fine. Can you send me a quote on these parts. Thanks Dan

Weathershield said they no longer carry any parts for my 30 year old windows so I'm looking for the bottom 10" metal track that the window slides in when opening. Also need the plastic/metal part that is attached to the window, but slides into the metal track (maybe called a snubber???). The attache ... (cont.)

This is the broken top bracket for a entrygard 20755 window 34.5 x 38.5. Here is the photo. Is this part available?

Image sent is a very rusted casement hinge? Maybe? Need your help in purchasing all needed parts to fix. Thanks!

hi there. i need operator and hinge for this window.

The crank handles say SEMCO. I have three pairs of windows that were installed around 1995. I want to replace all the sash, window, and frame hardware for all six--three L and three R windows. The measurements I took all looked similar except for the stamped numbers. Unfortunately, the snow around m ... (cont.)

The winder for one of our windows broke and I have not been able to open the window in several years. I have attached images of a sticker in another window frame which might help you identify the manufacturer, the design of the working winder on the window next to the broken one, and two images of ... (cont.)