Viewing all customer Discussions for:

36-004-10 10" Stainless Steel 2 Bar Hinge Set

The black piece on the right side is split in two. It's supposed to hold an arm in place while it slides on the track. Can i finf the black plastic piece by itself or do I need the whole track? I can go either way.The black piece is broken in two. It's the piece that slides in the track. ... (cont.)

Hey, How's it going? I Have 2 casement double vinyl units with no manufacturing company info. Hardware in truth hardware. All sashes need new hinge bars and part # appears to be 30744 located on swing arm. Wanted to make sure Swisco part # 36-048 is correct match for this hinge as I've resear ... (cont.)

I need a left and right of this assembly for

I put the actual measurements of my window hardware. Additionally included is the photo of the mechanism which goes through the window that I need for both windows too -it measures 5"

I have a casement window (manufacturer unknown) where the top corner of the window is now loose and off the track..I can't tell if the parts are broken or what I need for repairI've included a couple of photosany suggestionsRon

I Believe this is Truth Hardware but not sure of the parts I would need to order to replace. Can you help? Thanks Phil

Hello I'm looking for parts to replace old window Hardware. It is Roto manufacture but I did not quite find match using the number on ARM. I would like to get new operator, the arm and optionally the bracket from image 3208 (as it is getting old and broken as well - just the plastic) Please let ... (cont.)

Is it possible to replace an older (1995) casement window hinge with an adjustable hinge? My casement window is sagging, but my old 1995 hinges are not adjustable. Would a newer style hinge that has adjustable nut fit?

Greetings! I'm trying to repair a Crestline Casement Window that was probably installed in the mid-late 1980s. The glass dimensions are 24" wide by 42" tall. One arm is labelled "Entry Gard Truth". One crank arm has the number "20810" stamped on it. One crank arm has the number "31538" stamped on ... (cont.)

Hi, I'd like to replace the hinges, operator and crank on my windows. Could you help recommend what parts I should order. I'd like to replace the current parts with something a bit more heavy duty to resist wind and use.

Looking to see if you can cross or identify the part numbers needed so I can purchase from Swisco. Window Hinges is 10"need (see pictures/manf part numbers)for a left swinging window. Maybe Swisco 36-004-10? Window Cranks measured around 13" (Truth assembley - no part was visible) need one for a ... (cont.)

The stamped numbers are close to a few that I looked through L30841 LH30470 But measurements don't match

Hello I will need to order a 2 bar hinge set for my Loewen Steinbach window are their left and right sided ones if so how do I determine which one I need? Is it determined by the location of the crank? If on the left is it a left and on the right a right? How much is shipping to 40071 Thank You Bi ... (cont.)

I ordered the 39-031 EntryGard Dual Arm Operator and installed it, but the window will not close the last few inches. I noticed that the original operator has a Link Arm with an upward offset, while the replacement 39-031 has an downward offset, and it appears that the downward offset is causing th ... (cont.)

I recently purchased a left and right Sash Dyad Crank, 5" (39-187 39-188) from you to replace the existing broken cranks. Both installed without any issues, however, the right window (as viewed from the inside) has a damaged track which I did not see when I purchased the cranks. I can't seem to f ... (cont.)

I am looking to replace the operator arm and the bracket on the window. It is a Jeld Wen Clad Custon Casement operator JEL-N-668

Hi my name is Saul . Was wondering if you carry this type of casement hinge?

I am looking for this part! I was given your company as a place to start! Thank you!!

We are in need of the following Andersen Part - images attached. It is an older window.

fibrelux casement operator