Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

I need the center opening mechanism for one window and when looking from the outside the bar assembly

Need the full awning window mechanism 40511.

We are working on a Frank Lloyd Wright Restoration and we are looking for this same handle/arm.Do you have this part in stock or tell me where i can find them.Thank you,Ron

I have a vinyl awning (top hinge) window that does not lock closed hard. The operator also appears to have been damaged in some way, as when you crank it all the way in the arms block full closure by having the ends interfere with the frame. Only label is the word TRUTH on the operator arm. I foun ... (cont.)

Hi there. As the subject line states, the house was build in 1965 and the window is original. I found the Caradco logo on the end of the crank, so that was my starting point. Now the mechanism still works but barely, with lots of slack everywhere but need help in ID'ing the replacement. I have a ... (cont.)

The retaining bushings are coming loose and I cannot tighten them. Do you have a tool for this?

My casement window no longer opens with the original handle. I bought a new generic handle, but it still did not work. I believe the handle section is stripped and I need a new operator piece , but I do not know what one to order. Please recommend my replacement part. Let me know if you need more ... (cont.)

Hi, I need help finding replacement part for an awning window operator. The # on the one of the arms is S-1081-62. The window is an Eagle Low-E4 272. I have included the measurements of the arms in one of the pictures. The collapsed length is about 21.5". Thanks, Eric

Hello, I'm hoping you can help me identify this window operator. I need to replace the whole part. The arms measure roughly 16 and 1/8 inches (not certain since I cannot close the window). The crank housing (spline?) measures exactly 5 inches wide. Thank you.

I think the part number I need to order is 39-083. I think the color I need is bronze. Please see my picture. Please verify this or tell me the correct part number to order. I have measured the arm length and it is 21 1/2"this is for a replacement. the threaded part that around the worm gear shaft o ... (cont.)

Hello, my parents have this window that it stopped working. The handle makes that the window opens facing up, so the arms are in the sides of window, on left and right. The house is more than 50yrs old. There is no number around the handle. Do you think u can help? It wont open at all now. ... (cont.)

The crank will push window out but not return. I bought Parts 39-083 and 39-114. Do you know how to repair the current part v taking the whole window apart?

Hello All, My house was built in the mid to late 90s and has three open-upwards casement windows in the living area. The crank handles have 'Craftline' written on them. They are starting to wear out (looks like the teeth on the screw are deteriorating). Does Swisco have a equivalent part to rep ... (cont.)

I have three thermal gard window dual cranks that just spun when I turn the handle!

Hi wondering if you could help me with these items. The folding crank has Us Pat 361490 Truth markings. From your website, I figured it is your item part code 39 205. The rest I do not know. The spline (?) has a broken thread and would need replacing. But I could not find a matching operator cover ... (cont.)

P/N 45002, with Truth 9" arms (30895 & 40510, 2 each.) Appears the crank assembly is stripped.

i have 2 bathroom windows (approx 28w x 18h) that i removed the cranks from, due to rust (they were frozen and open 1-2" year round). My neighbor got parts from you for a similar window, but his dual arm crank looks smaller (39-140). I'm guessing i need the 21.5" size (39-083) to match the photo i s ... (cont.)

Hello, Looking to replace my window crank mechanism. The arms measure 25" across when closed. The part attached to the underside of the window measures 10". There is no identification on the part But I am fairly certain that it is a Fiberlux brand. Thanks, Mark

I need two window crank replacements for awning windows. The installer states that the windows came from a company called Super Seal. The number stamped on the arm is 30895-A. Hope you are able to help.Thank you,Jim

I am enclosed my windows pictures. Can you please tell me which parts and handle do i need it.