Viewing all customer Discussions for:

39-090 Window Dyad Crank, 5"

Unfortunately I discovered that although they have the same model number, the second section of the arm on the unit I have is shorter than the one I bought from you. See the attached photo. Can I exchange for another unit with a shorter arm that will fit and if so can you please let me know the pr ... (cont.)

I need to replace hardware a right hand casement window (as viewed from inside). I have attach a photo of the old but functional left hand window operator, which is stamped "Thuth 31272". I need a complete operator for the right side window. I also need a sash lock, which appears to be #38-091 from ... (cont.)

The cranks and latches are broken on a pair of windows. The windows crank open in opposite directions, I'm assume each crank device has a different pn. I don't have any information on the window mfg. or parts, they were broken when the house was purchased. Please let me know any additional informati ... (cont.)

Hello I have stripped gears in a crank arm I am trying to replace. To me it looks like WINDOW DYAD CRANK, 5" Product Code: 39-089 is the replacement part. Not sure I disconnect the arm from the window because I could not see the locking mechanism as it's a bit hidden underneath. Do you know I jus ... (cont.)

hello, we need to replace 2 dyad operators in our home (the housing has cracked) and need the link arm to be 4". We are having trouble finding this...any suggestions?

NOT SURE what part. thanks

screws on crank are 5 inches apart. The next piece is 3.5 inches from rivet to center of gear. Next piece is 4 inches rivet to center of hole.Thank youJeff

See there attached photos. The unit has a number stamped on it, The inner arm cranks out from the left side of the gear. I've purchased both the 39-187 & 39-089. I've found that these units won't close the window. Is the 39-090 or the 39-188 the answer? I appreciate your insight. Thank you. ... (cont.)

I have a house full of Alside replacement windows, I am in need of a couple af window operators and there part #s, as well as a piece of double Payn low E Argon glass measuring 12 7/8 inches by 27 7/8 inches. I have attached a picture of the window and operator. These are replacement Alside windows ... (cont.)

Hi: My crank broke on the left side. The part that mounts to the window on the inside broke off. It looks at LOT like this crank but the arm is much longer, like 12.5 inches. I believe this one will work, however, but does it come with a longer arm? Is there another model you can recommend? I think ... (cont.)

Looking for part of the hinge mechanism to be replaced right where it's rusted it snapped off completely at the bushing

Hello.I'm looking for a replacement as the screw holes in the body have striped and been tapped several times.The body is 5" wide from hole to hole and the arm is 3.5" long (past the pivot point). The arm from the crank to the appears to be 5". The only marking on this is: US PAT. 4505601.There are ... (cont.)

I am attempting to fully replace the casement and hinge indicated in the pictures. What is shown currently installed is for the sister window that hinges left, whereas the parts I need are for the window that hinges right. The parts that are proving to be difficult are the track and associated hinge ... (cont.)

Trying to find Casement window operator.

looking for crank and arms and hardware to attach to window from inside the window opens on the left right side of window slides to the left

I have a double casement vinyl window. The hardware is stamped Truth. The stud bracket mounted to the window is flat and is 8 inches in length. On the window pictured the stud mounted to the window is rusted off. I should probably replace all the hardware for both the left and right windows. The len ... (cont.)

Something inside is stripped. Can't open the window for the first 3 inches then can't close it for the lsat bit. Have to use hands to open and close.

Could you please help me find the crank I need for this Traco window. I tried the 39-187 but it wasn't closing the window. The zigzag arm is a little bit longer on the old one.Thanks

I need both hand cranks. The picture supplied is of the crank for the left side window looking out from within the home. I believe I am looking for 39-187 & 39-188 but would like a confirmation from your experts. Thanks Jim

The brand of the casement window crank assembly is Truth. The part that is damaged is the black piece and attached metal glide (shown in photo) that ties in the lower hinge of the casement window to the installed to the track appears to be damage/cracked due to use. It jumps from the track. The b ... (cont.)