Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Windows are at least 35 years old. The cranks just seem to stop working. They might've been forced. Not sure what needs to be replaced. I have two right and two left opening casement windows that need to be fixed. Do you need to see the part/ arm that opens the window ThanksCary

Handle broke at operator. From video it looks like I need Truth Dyad Operator 39-316, stud bracket 39-514, detach clip 39-105 and crank handle 39-114. Are these the correct parts?

Looking for the window parts that are in this picture, I may only need the parts that attach to the window

I believe the windows are TRUTH brand and they are casement. The pictures are of the right side of a double casement window that measures about 57.5" by 69". I need hardware for the left side. I need the window arms top and bottom and I need the locking mechanism. Can you help?

Hi, I am looking to replace these parts.

Hello, Thank you very much for your help. Would you be able to identify the pieces in the photos that I have attached? Sincerely, monica

I need 5 lefts and 5 rights.Thank you,Jim

Have broken crank, the turn screw pops out when the crank is turned. I believe I need 39-217, window opens to the left, the single arm is roughly 8.5" long. I also have multiple cranks like this, would like to replace the front of them with 39-107FK, is this compatible?

HI I have a crank missing in one of the windows i have attached photos of the missing crank and the crank on the window next to it can you help me identify the correct part?

Truth 20810 operator

Hello - I am trying to identify the hardware to replace broken cranks/operators. The photos show Truth and 40942 (left side window) and 40941 (right side window). I have additional photos and videos if it helps. I need 4 left and 4 right. THank you.

These were installed in 1990 with each window have the same manufacturer decal. Would like to replace the crank handles as none are working-

Any idea if you have this broken part?

Hi, I need to replace 6 window bottom hardware.

In both pictures I show the inside and outside of the parts

Hello - this is the crank on our encasement window. I cannot tell who manufactured the window. It is not Andersen or Simonton. The window got left open and the crank rusted and is bent. We need to replace the crank piece. Any help would be appreciated! Thank you, Taylor

Hi ? hoping to get some help to identify the parts I need. I will need three parts. I really appreciate it. Thanks

45x39 double awning window

I removed a broken awning window operator from my window. I cannot find a brand or part number on it anywhere. It has a brass plate on the bottom, two arms with shoes on the ends, and a track that the shoes slide on attached to the window. It is a crank style operator but I would like to buy a lever ... (cont.)

Seems like a generic type crank. The distance between mounting screws is 3 3/16".