Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

Would like complete assemblies if available. Otherwise,I need two coil balance springs. Only numbers I can see in the plastic is a patent # 4.610.108. Also a number on the coil is 6 or a 9? Window sash is 22.5"x 22.5"x 1.5" thick. Window channel is 1.25" wide.

need a spring, tilt hardware, and weatherstripping. Please respond either way, thanks, Mike

first picture is two pieces.top piece is the spring mechanism and the bottom piece is the part that the ssh hooks into and slides on. Second picture is just the spring and the third picture is just the piece that the sash hooks into that slides up and down. The windows are from 2005 and are made by ... (cont.)

On the broken balance, I see Patent #'s 5.232.208 - 5.365.638 - 6.584.644. Pictures are from a similar window where the balance is working fine. Do you know what this part is?

Hello we have 2 large Midgard windows that need all new bakancers and shoes, 3 springs each at 9lbs we were told. 1 window needs a new tilt and pivot bar. We watched the video and don't want to cut the vinyl to remove and install the new balancers is there a special tool that can spread the chan ... (cont.)

It looks like a doubble coil. I need both parts. The one that's screwed down and the part that slides for both sides of the double hung window

I need replacement parts.

My customer has Simonton windows. Both balances and both tilt locks are broken. I need help in what to buy.

I have six windows that need the spring assembly's replaced please see attached picture and let me know if you have these parts.

Can you kindly help identify a replacement part? Simonton Window, lower sash pivot bar is broken/missing. The pivot lock shoe is pictured as well. Thank you!

This part is the bottom pivot part for the window to tilt in. I'm guessing it usually travels up and down with the window but now is stuck at the bottom. I've tried several times to work it free but I can't get it to move. So I guess I have two problems: 1) Get this broken part out 2) Get its repla ... (cont.)

I'm not sure what I need to replace this part left and right. On one of the springs is Omega #6.3 33", US Pat 5232208. The other spring has a 3 on it. Pictures included.

The lighter plastic part is labeled as OM137 patent pending. The lower part is labeled 4.610.108. Thank you!

I'm looking to replace a window boot for the window tilt system. The numbers I see on it are: 4.610.108

Hi, I need help identifying parts to replace the constant balance double coil in my vinyl windows. I can't remember who made the windows, but I think it's either Simonton or Certainteed or some other manufacturer in Richmond, California that's no longer in business.I took a few pictures of the label ... (cont.)

I am looking for the balance springs and covers for this Simonton single hung window. Also, the sliding latch that allows the lower sash to tilt.

Hi. I have two windows that need need to be repaired. The same part is broken on both. The windows were manufactured by Reynolds Metals in Baltimore, MD in 1997. I can't send pics of the part uninstalled as I don't want to start the project until I know I can find the exact replacement part but let ... (cont.)

HiI am looking for replacement coil balances. Photos attached.There is a patent number on the part, hard to read it looks like 4(?).610.108The sash weighs 26.5lbs and there are 3 coils in the window. I watched your video, it doesn't look like we have any balance supports in the window.Many thanksHel ... (cont.)

Part size 2 15/16 inch by 1 3/16 inch, not including shoe part in photo. I need two constant force window balances including shoe and coil springs. Window manufacturer is Hayfield Windows, Double Hung Window #800 Part # on photo is 801020 Window weight is 24 lbs., so need to support 12 l ... (cont.)

I am missing one of these supports. The support is 1 & 7/8" till 1 & 1/4 "wide at widest part amd the main part of the support is a little less and the support also has a rib facing the inside of the window