Viewing all customer Discussions for:

16-002 Take Out Clip

Part numbers are too corroded to read. The metal channel is 15 inches long. Looking for help identifying a replacement. The metal tabs clips in the window channel need to be replaced also.

Good morning,Im Looking for window counter balances for vertical sliding windows and small steel retainer clips that snap into window frame, both items shown in attached photos. The only numbers, names or markings I can find anywhere on the item are(26-4 BA CMC 7) also shown in a photo.Please tell ... (cont.)

We have KINRO windows that new the balances replaced. The balance have 26-4 stamped on them. The balance shoe is 1 3/32". From your help with others it looks like I will need a S385-27 Balance. I have included a picture of the Top Sash Guide, it looks like a 18-171? And I would like to order severa ... (cont.)

The length, excluding attachments, is about 30 inches.Stamped with 29 3.Channel width (external) is about 1/2 inch

Hello, my window balances are about 25 years old. I like to replace them. Which balances are the right ones? In addition, I'm looking for the correct sash guide for this balance. Two of them have broken off.

I am looking to find the needed part numbers for a replacement window balance and take out clip Thanks, Dimitri

have a non tilt window and trying to identify parts to replace. can't figure out how to install either cause this window doesn't haver the clips inside the window Fram track at the upper part of frame that on other windows pop out so the bracket has something to hold bracket in place once its under ... (cont.)

Need replacements: 2 channel balances, 2 sash guides, take out clips Channel Balance: "31 5 BSI" engraved (see pic "Channel Balance 06") - width 1/2 inch, length (metal only) 31 5/8 inches, Actual Window Weight 30 pounds Sash Guide: Width 5/8 inch, Depth 9/16 inch, Length 1 1/2 inches; not larger ... (cont.)

The part is 28" long the stamp on the part is 2790 and 30 there's also a an AG and 8.51 stamped between the 2790 and 30. I don't know the weight of the sash I'm hoping one of the numbers in the stamp would denote the weight. Both balances are destroyed and it appears the take out tabs are missing ... (cont.)

I have the length measuring at 44 1/8" and the shoe is 1 1/8". I believe I have the series 390. We would be looking at an estimate for 12 of these. One has 4240 and the other has K 4330. Even though I have two different stamps, my technician is requesting them all be the same length. As for the m ... (cont.)

I am looking for Side Load Balances for Single Hung windows made by Jeld-Wen. The stmp is 20-3 (width 1/2"), which Channel Balances should I choose? Also, should I use Product Code: 16-002 for the Take Out Clip?

Window balances - I just spoke to someone about getting replacement ones for my window that is 461/4 x 58 1/2 I have some photos but the old balances are not in the window - I did take a picture of the one in my bathroom (which is very small not the same size) I am hoping you can assist me in fi ... (cont.)

I am trying to replace window Balances for Non Tilt windows: Stamp 2930 RG, Balance Length 30" , width 1/2". Bottom shoe depth 1 1/16" Sash stops pics 51, 52 Will need two sash guides , could not Id on the site, Thank you for your help,

Metal channel lenght = 25"Stamp = "24-4 FQ5 CMC 21"Unknown window mfg, new home constructed 2022need 2 balances and two clipsPhoto file names indicate top or bottom fittings, letters A,B,C indicate view orientationI will attach 5 more photos in another submission for better details, since upload lim ... (cont.)

I want to replace my window sash, length 28 in part#2740, and the take-out clip to go with it. Pictures attached. Thank you for your help

Hi there,I like to get quote of window channel balance. Me measurement as belowMetal to metal: 26 inchesWidth range (window channel balance): 0.5"Sash weight range: 26 lbs (possible option 2550 / S351-26???)Clip:Top clip: 1.3/8" (one and 3/8 in)Bottom clip: 3/8 inWhat I needWindow channel balance: ... (cont.)

Hello, I called earlier and am sending pictures of the Block and Tackle balance , the take outs and the window that does not close. I noticed that the stamp says Length of 25 in. But my measurement of metal is 25.5 in or 25 5/8 in. There are no broken parts that I see but window does not close an ... (cont.)

I have a broken take-out clip and a broken channel balance. I think the mfg is "Kinco". If you can supply I'd order two of each, just to cover me for future problems and/or difficulty matching new balance with olde one.

T want to replace my window sash, length 28 in part# 2730 HC BSI, and the take-out clip to go with it. Pictures attached. Thank yo for your help

I want to replace (2) channel balancers. Length is 28 inches, 2740. Images attached. I also need the clips that are in the sash which the balancers connect to.