Viewing all customer Discussions for:

18-009 5/8" Top Sash Guide

The sash has a plastic part (fitting) on each side facing the vertical frame. This plastic part interfaces with the balance. On one side of the sash the plastic fitting is broken where the balance has nothing to push against. Does your company supply the sash plastic fitting for MW brand. Picture ... (cont.)

Good morning,I need four 2830 sash balances for Viking metal windows. Attached are two photos each of each end (four total) plus a photo of the inscription "2830."Can you help me?RegardsPat

I just received 2 Swisco channel balance replacements (S385-33) for one of windows. When I tried installing them, I was having more trouble than I expected (I've done this repair on other windows on the house with Swisco parts). Upon inspection, I found there was a broken plastic part screwed into t ... (cont.)

there is a part that attaches to each top corner of the window and apparently, they what hold the top portion of the channal balance in place. On my windows, they are all broken as you can see from the photo so there is no way for the balance to work properly. Can you provide replacements for thes ... (cont.)

Looking for the right sash cams 1" x 1" top

We took these out of the windows that r currently in my home. It allows the window to go up and down, but currently no working and need to replace them. There is a #2730 on these.

Metal channel is 32.5 inches Stamp indicates 32 4 Manufacturer: window logo shows "mm" Need 2 balances, possibly 4

Needing 4 each of these plastic parts shown in these pictures for my Alenco windows

I took off a broken block & tackle balance in a 20-yer in Milgard window sash. I easured it: its metal channel is 33" long, it is 1/2" wide (actually measures 9/16"), it has a printed stamp on it reading "32-4" and both plastic ends have wings. From your visual catalog, it seems that my Swisco rep ... (cont.)

Do you carry this part? I think it's called a window side balance guide. The vertical sliding window was made by Window Masters.

Need 4 balances per photos The metal is slightly over 30" They do not have any numbers nor markings

I've included the pics, there are 2 balances per window. I have 2 identical windows with bad balances so I guess I need a total of 4, 2 for each window. Plus the other hardware plastic pieces i think are broken. Thank you very much, let me know if you need more pics. the number on the bar was 2730. ... (cont.)

I am looking for a replacement part for a top sash guide. I am no handy person but I think the measurements are 1" wide, 11/16 deep and 1 5/16 tall. thank youMollie

CHANNEL BALANCER STAMP 26-5 SERIES 300 5/8" ------NEED 8 PLUG- PHOTO ABOVE 5/8"--------12 HOW MUCH ?

Hello, I am looking for a replacement part for this window, no tilt. Thanks, Robert

Hello, I believe the part above is a TOP SASH GUIDE? Pls confirm part number, I would be ordering 4. Thanks much. Im a customer from 1 year ago, Your Order # 2120072. Thanks for your help.

Would you kindly help me identify this part for ordering? Left side of the photo with a hollow us the top of the sash, it seems to be a horizontal plastic water drain channel. This is the tip sash guide of a Milgard 2003 window. The balance pops out due to the blocking top flat section having bro ... (cont.)

Hi there, The stamp on the channel balance says " 30 3 KN Caldwell". Could you please suggest a right replacement and a compatible top sash? Thanks, Dmitry

Hi, I have a few windows with the balance slided out. Is it something that can be fixed by replacing the balance or something else. I don't see any physical damages on the balance itself.

Hi there