Viewing all customer Discussions for:

S160-03 3.5 lbs Series 160 Coil Balance

Two springs in this. One says #6.5, 35" and the other is #3.5 35". I have Simonton tilt in window. There were two springs within this one balance. Thank you.

Looking for constant Force Spring #3 1/2 in 1 hole

Looking for window coils #3 and plastic sash

this is picture of my window springs i need to replace there are one set like this on each side of window frame. all the other parts are ok I need enough to replace on 2 windows.The longer spring has a omega number 5233208 #4:5 33' and the shorter one has 3 stamped on it They are 1/2 wide I had th ... (cont.)

Hello, I have Amcraft Grand Estate windows and one Of the coil balance springs has broken. I need To replace the spring, shoe, and spring cover. #90 35 is stamped on the spring. 801020 is on the cover. There are no markings on the shoe.

One coil #3 and one coil #5 coils are 1/2"

Hi, I've got a '99 vintage Simonton vinyl window with a broken coil balancer. One coil has a 4 and the other has a 3. Can you please help identify which part would make a good replacment? Thanks, Tom

I have 2 broken springs, no markings found on any of the hardware. How can I decide on force selection? Can I weigh the window and split it for each balance? Thanks, John

I need this whole assembly for my window. My hoyse is only 4 years old and this broke already.

Coil support has part # 801020 stamped Shoe measure - 1 1/4" wide, 1/2" thick and 1 7/16" to bottom of curve Coil spring - 1/2" wide...has #3.5 35" p stamped in ink on coil spring.

This was in the left side of my window which helped the window go up and down. It doesn't stay up anymore. Right side is missing. Handyman company couldn't find a replacement.

I CAN'T SEEM TO FIND A AMERICAN WEATHER SEAL PIVOT LOCK SHOE THAT LOCK SHOE THAT LOOKS LIKE THIS. ITS BROKE IN THE TRACK AND I CANT GET IT OUT WITHOUT BREAKING IT.

My handyman just asked me to try to find this part for a broken window.

We need a spreader to remove the parts and photograph them...can you quote me the parts based on these photos?

I am looking for replacement coil balance hardware. The windows are builder grade, with no marking that I can find. the window dimension is 58" tall X 35" wide. The lower sash is 30" tall X 35" wide. The coil support is 4.5" long, and 1.25" wide. The brake piece is 1.5" tall X 1.25" wide. The ... (cont.)

Would like replacement parts for spring and two othe parts shown.

It is a coil of metal in the track that lets the window slide up and down. The metal coil has unrolled and bent up. It needs to be replaced.

Good afternoon, trying to find this part or its replacement(s). They are Traco windows, however I am not sure of the parts as I did not see any part numbers? Was told it was a window balancer. This makes sense as it appears to be a coil spring used to keep the window stationary when raised (lower) ... (cont.)

I need all these parts. One coil is marked 5.5 lbs. The other is for a small window and has no markings. I assume the lightest. Please send me a list of the parts so I can order them. These are out of Simonton windows.

Looking for this shoe and support.