Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

I need to replace 2 broken balances on my window. They have the markings of 28C on them. It's a regular slide up and down window, NOT a tilt window. I have been looking at these, but they all look the same to me, and that's when I came across your web site. Which would you recommend purchasing. ... (cont.)

Hello I hope you can help me identify what I need to use to replace the part. It has a stamp 28 4 JR Caldwell

Hello I need to replace window sash . It's 29" long and 1/2" wide. I found part on your website but wasn't sure about the end guider . Can you please let me know what I need to order? I need 4 count.Thanks Prakash P

I need to replace the channel balances. Sending the photos. Please guide to buy the correct part. Length 29 inches Backside stap:2830 Thank you Suresh

I have the product details 1/2 wide channel 29 total metal length Looks to me like S 385 Markings on the one that came out says 28E USB

I have 28 year old home that has 8 broken balancesI'm at my wits end trying to replace them I hope you can helpThey are non tilting windows single hung with a block and tackle system. The only part number I found is 28 4 DN CALDWELL Thank youMark

Please help identify my window balances. They are stamped 28C I believe I need the 2830 balances. Photos attached. Home built in 2006.

1. Are your series 29" 380 channel balancers a direct replacement for my old Viking windows? My units have the # 2830 S stamped on them. Your top 19-005 attachment is winged like mine, but your bottom 15-005 shoe is winged and mine is not. 2. My top sash guides, (your item 18-032), measure 1 & 3 ... (cont.)

Stamp on existing balance is 28D. Window weight is 28 pounds.

Need help identifying parts

I am wondering why I can't get the window back in the frame with the parts I ordered S380-29, 2830 & 2820. The stamp on the original parts are "28B" and "28C". I tried 2 windows and could not get the windows back in the frames after installing the channel balances. (I had to remove them to get th ... (cont.)

Cws window 33 1/2 wide 30 tall 29 balance 1/2 wide 1 bottom piece with a 294 code part # please

I have aluminum non tilt windows. Balance loook like your Series 380 o0r 385, but my shoe is only 7/8" deep like your 15-029. Can I get that shoe. I need 4 balances, 29" long metal, Stamp says 28 B.

The unit is 29 inches long an 9/16 width

I am looking for channel balance replacement. the pictures show shapes of both end and metal clip. the stamps on the balance is 28B . I measured the balance length is 29 inch (metal channel only, does not include balance attachment). Please help to identify which parts I will buy to replace the bro ... (cont.)

Hi guys, I have a window balance that is super close to what I see on your website but is not exact. Particularly in the lower shoe. I have attached a couple of pics to see if you can help me identify them. These are 1/2 inch channel and 29" long (just the metal). I also need a couple of new wi ... (cont.)

Hi, Just moved into a new house and both channel balances on a window were removed by previous owner and are broken. Photos are attached. The original part is 29 inches long and the marking on balance is UB 28D. Also the clip at the end of the balance is gone so I don't have a photo. Would appreciat ... (cont.)

I need 24 of these set up like this please.

channel balances have to be replaced, what is part number and price and there a had to install movie

Looking for 2 Unique 28 b 20 balances. Manufacture date was 9/16/97. Metal track is 28 7/8 long and half inch wide. Ends broken but here are photos