Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

the rod is 29" long I hope the pictures are of some help the numbers on the rod are 28e50 they are on the rod in a machine print as well as with a marker written by hand

I believe i need a channell balance 380 series 29" . But my stamp reads 28D USB . I dont see that as a choice . I need 14 of them .

This is a 29" balance x 1/2" wide, stamped 28E, top and bottom pictures are attached, can you please help me identify the correct part? I thought I found the right but the stamps don't match...thanks! Chris

My 48" Kinco's were installed in 1990. The balancers are shot. 29 inch channel, no wings on either end. Stamped 2840E. 25 lb. no tilt sash. Photos attached. What do I need to order?

My balances are marked either 28A, 28B, or 28C after the number it is marked USB. Also I am including pix of the ends. Please suggest the proper balance. I will order 9 or 10 pair

need 4 replacment window balance 29" long Top catch is 1/2" wide x 5/8"deep.Wings are 1" wide Bottom shoe is 1/2" wide x 15/16 deep. Wings are 1" wide Channel is 9/16" x 29" I think it is a S380-29

1/2" x 29" Stamped: 28F Top and Bottom Attachments per attached photos

I am in need of one balance (not sure if this is the correct term for the part: image attached) with dimentions 29 inches in length, 0.5 inch in width, and 0.5 inches in depth (weighs about one pound). These are from a 25 inch wide x 70 inch long window and it looks like "U B 29C" is printed along t ... (cont.)

The existing balance is stamped UB 28C and is 1/2" channel that is 29" long It is not the original since the contractor installed " heavy duty" balances when the large window was very difficult to operate ( the overall upper an lower opening is 51" W x 72" H. Which of your kits would be best to ... (cont.)

TRYING TO FIND A REPLACEMENT FOR THIS BALANCE, WILL NEED A FEW SETS. 1/2" WIDE 29 INCHES LONG LABELED (28D U.S.B.) SEE ATTACHED PICTURES

I need to replace a few window balances but don't know which part to order. I removed the channel balance and it measures 29" end to end on the metal part. It measures 9/16? wide. It's has a label "UB 28D". I also weighed the windows and it is 23lbs each.

I do not know the maker of the windows in the house I own. I need help identifying the correct replacement channel balances. I have provided pictures. The only markings on the part are "28 4 Caldwell LM." The part measures approximately 5/8" W x 29" L.

First time window repair project 30" long Need 2 for the same window. should they be lubricated?

I need help ordering replacement window balances. Theyp measure 29" fro. Top to bottom without the plastic ends. The marking engraved on them says 28D. I need six of these and i am not sure of the manufacturer of the window.

The balance is 29" from metal tip to metal tip. It is stamped 28D. From other posts and the pictures on your website, I believe it is the Series 380, 29", 2840. Is this correct? Thank you so much, I have been putting off replacing three windows worth of balances for too long now. ... (cont.)

metal measurement is 29" sash weight is 14 lbs not sure of top or shoe. There is a name --unique 28-B-20 on the side of the balance

I need a pair of replacement Block and tackle balances for a single hung window. Markings UNIQUE 28-C-30 Channel is 29" long 9/16" x 5/8" The top appears to be your part number, Channel Balance Top, Winged 19-005 I can't match the shoe. Se attached pictures.

My channel balances are 22d usb and 28c usb, i ordered the 380 series 23 inch and 29 inch balances based in the actual length of the metal part of the balance, did i order correctly ??? thx

I have the following information on my balance UNIQUE 28-4-40 are you able cross-reference this for me? I have also attached a picture of the broken blocks. Lee

I am having to replace a left and right window balances that have broken hardware, manufacturer unknown. I believe I need the 29" Series 350 Channel Balance S350-29 as the dimensions seem to match, including the Top and Shoe. I have attached a picture of the pieces to confirm that these are the repl ... (cont.)