Viewing all customer Discussions for:

16-024 Mounting Bracket

I have a double hung window 33"x47" and the top section has a broken surface mounted tilt latch and the bar that goes into the valance is also looks bent. the Valance spring also appears to be broken. Both are on the left side when facing window from the inside. I would like replace both bars and bo ... (cont.)

I need both springs on 2 Windows,so 4 springs Total. Windows are 20 years old+ Also send me a video describeing how to insert them and if I need any special tools.

Hi. I'm trying to locate replacement springs and sliders/units for 2 American Heritage(?) double hung windows approx 15 years old. Photo 937C? shows a snapped spring and has 8HB stamped just below the 2 holes that connect to the side bracket in the track (photo E0CA?). The housing unit attached to ... (cont.)

I am trying to replace coil spring balance. But, I have no idea which one to buy. It has mark of "8R" (left one has mark of "8L"). It also has "PAT5,353,548" on it. I am also including tag from window itself. Please help me with identifying. Thanks,

Top coil is a 6lb, bottom is a 7. Patent # is 5353548

Hello, please let me know if you have these 2 parts for me to order and also is there a video on how to cut out to get shoe out I have no openings to get out?Thank you,Mark.

I purchased these Parts back in 2014. My window keeps getting stuck down at the bottom. They are pulled down Windows so if I bypass that bottom part I can slide the window up. But once I close it, it gets stuck again. I tried to send a picture of my order from 2014, which I kept a copy of. I tried t ... (cont.)

IS 180-5 THE COIL SPRING FOR THE SECOND COIL ON S-161-05, ALONG WITH COIL HOUSING 15-086? Or what is the number for s161 with 2 coil spring 5lb.

Hi. Thanks for providing a place to ask for advice. My windows are Certainteed brand installed new in 2005. Over the years, I have had problems with the coil springs breaking in these windows. I have replaced a few and have always found it a struggle - mostly when it comes to attaching the hole i ... (cont.)

I am fairly certain these two parts are correct (based on patent 5,353,548) Coil Housing Pivot (plastic) 15-087 Tandem Coil Housing (plastic) 15-086 There was no number on the coil spring. Need help in finding the correct coil spring The spring is 1/2" wide with two round holes Dimensions of ... (cont.)

Good afternoon. I have two window sashs requiring the coil balance replaced. One sash weights 13.6 lbs and the other weights 15.6 lbs. I couldn't find any identifying marking either on the housing or the coil spring. I measure my housing and it is slightly smaller than than the S161 and S210. My ho ... (cont.)

Hello, my windows kept falling down because the coil balance is broken and I wanted to replace it. I am not sure which coil balance, guard, and shoe I need so I took pictures. Thank you in advance for your help.

Could you please suggest what model will be suitable replacement of attached broken window balance. Many thanks!

I am looking to replace broken balance but not sure what one I need. Here are some pictures not sure if its a 6 or a 9. Window is 31x45 thanks Paul

I have ordered from you before about a year ago. I have two Vinyl double hung windows that my tenants are rough with. These parts fell out of the tracks on the sides. They keep the windows from sliding down by themselves. Do you have these parts? Thank You, Shawn

I think my coils are not broken. The plastic housings are broken. Do I just buy the coil housings? Are there more than one type? Here is a picture of an almost working balance.

Hello ? I have identified replacement housings (15-086) by dimensions and appearance, and the coils by rating and dimensions (S180-6, S180-7) but cannot find a match for the pivot housing. Please see the attached photos. Will the 15-087 replace both the lower tandem housing and the pivot housing, or ... (cont.)

The coil spring assembly that balanced a 30 year old vinyl window broke. Bottom window won't stay up. Do you have a replacement? The track it fits in is 1, 3/16ths inch wide and 5/8 inch deep. The window opens about 12 1/2 inches. Thank you! Jeff

Both pieces(still in the window) say either 7L or 7R. There is the following info on the broken coil metal 7HH. Info on the window sticker in image uploaded. Window will no longer open, too heavy, need to know what replacement pieces to buy. Need to replace the coil balance on both sides. ... (cont.)

On the metal rolls is stamped 731v on one and 536v on the other. Size is about 1 1/8th inch wide, 9/16ths thick and 5 5/8ths long. It is a 30 pound tilt window made by CDI.