Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

Hello, I have window channel balance with two different part numbers as shown in IMG-1295. I am looking for the correct shoes for both these channel balances, and the type of shoes as shown in IMG-1291, which is about 1-1/4 x 1-1/4 in dimension. Also, I am looking for the missing part that holds th ... (cont.)

I have a window with two issues. First being unable to close all the way which after removing window from frame realized that weather stripping was getting caught up on that ledge attached to frame as seen in picture although do not know exactly why. Second issue was window was extremely difficult ... (cont.)

I really just need the white tab on the top of upper channel balance. May replace all of the upper and lowers. Please provide numbers for both upper and lowers.

I purchased a home that has original MW Twinseal single hung windows throughout from 2000. Almost all of them have broken window balances. I have measured the silver tube (27" x 3/8" diameter)and the black foot (1 1/4"). After studying your website and comments, etc. I think I need the 850 series ... (cont.)

Good Afternoon, I have three different size windows and multiple balances that need replacing. All my balances have "hooks" that attach to the interior frame or slot. ~I need 6 balances to replace my existing balance that has 24B and BSIN on it. It is 24" long EXCLUDING the hook and shoe. ~I will ne ... (cont.)

On your web site I have found several pivot lock shoes that are close to this size, but did not find an exact match. Looks to me to be 17/32" x 1" x 2". Thanks in advance, Michael

Ive posted several photos of my sash balance that I need to replace. It appears the plastic tip or the terminal housing broke off the balance. The balance is 28" long and has no markings. There are couple markings on the terminal housing that appears to be a patent number: PAT #'s 6.679.000 ... (cont.)

Hi, I am looking for the part pictured. In the last picture it is the part on the top. The number stamped is 28C BSI RL. Thank you,Franklin

I am hoping you may assist me in finding replacement balances for the windows in my house. My home was built in 2000 and has the original windows. Several of the balances have failed and before I am forced to replace the windows (which would involve removing half of the siding on the house due to ... (cont.)

Number on metal spring holder 28D BS1 Number on pieced that clips to the window 4810108

Spring ballast with locking for window that fold out for cleaning 28 inc long half inch wide half inch deep

Hello, I am in need of new T-lock balance shoes on most of my windows. I bought 2 shoes to check the fit and although I was able to make them work (with hammering to flatten the indent on the balance) I feel it would be much easier to replace the balance as well. The balance I need is the 795 serie ... (cont.)

Need 2 full sash mechanics and related hardware. 29-15/16 inch long 1/2 inch wide and 1/2 inch deep. 28 inch metal frame

I have a 28-3 channel balance. Do you make a replacement?

I need the S795-28 inches long, option 28-C. I need the open cam, 1-1/4" attached. I need six.Also need four 34-C, and four 34-B. Harley

Qty- 8

Hi, I ordered a new shoe for this window block and tackle and I cannot make it fit. I'd like to replace the whole unit. Could you please suggest one? Thank You, Mike

I wanted to make sure that I have the correct length of 28 inches for the new 795 balance. From top clip to bottom of the bottom sash is 59 inches. The old balance measured at 28.25.

need custom balance that is 28 inches.

Lenght 28" 1/4 Part # 28C pb BSI Vynil window. No tilt Please see pictures attached