Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

Hello, Trying to locate a balance part for a Patriot Window used by Ryan Homes in a home built about 9 years ago. Hoping you can identify the part(s) needed. Thank you!

I need a few sash balancer for MW window. That MW is stamped on the window lock. I have sent 4 photos so you could get a better feel for the detail.Label says MFR code MW-1Series: Twinseal double hungH-R15-46x77H-R25-46x65H-R25* 42x77I would love it if you could give me info on (3) of these. ... (cont.)

Hi there, we're having some trouble tracking down these parts. We need the spring loaded pivot bar and balance spring for these windows. We believe they're Jeldwen, but no markings to confirm. Per the owner they were replaced in ~2009. We need the pivot bar which is ~2" long. The balance springs are ... (cont.)

Marked (10/2) unique 27-C-30 The plastic part that attaches to the bottom of the window is broke

I NEED TO REPLACE 4 SHOES AND FOUR CHANNEL BALANCES. THE SHOES I HAVE ARE AN OLDER VERSION WITH A DEEP GROOVE ON THE FRONT SIDE AND I AM ONLY LEARNING THAT THROUGH OTHER INFO I HAVE SEEN WITH PEOPLE ASKING QUESTIONS AND YOUR RESPONSES. IT LOOKS LIKE I WOULD BE THE 795 SERIES. JUST NOT SURE WHICH ... (cont.)

The window manufacturer Jen-Weld directed me to your website, as this is a 2002 window they no longer carry parts for (the window is series 9980/9980P).The balance shoe is 1" wide. Will any 1" wide balance shoe from your series 850 balance work? Every time I measure the balance (from the bottom of ... (cont.)

Hello,I have six windows with broken balances of the crossbow series 850 type, the crossbow is black and 1.5" wide. The spring is 13.75", the length of the gray rod is 27.25" and the full length of the unit with crossbow and top attached is approximately 28.5". The window sashes are 30". The closes ... (cont.)

Hi,I have a customer that has 6 window sashes with what appear to be Series 850 block and tackle balances with black shoes and plastic clips at the top. These are at least 15 years old. They all measure approximately 28.5 inches from the base of the shoe to top bracket and I didn't see a match for ... (cont.)

Trying to find a replacment part. The hook on the top of the shoe broke off. I ow the balance is not attached to the window pane

I have 3 windows that I need to replace the balances. I have replaced 2 other windows before. I have a picture of the parts I replaced several years. They appear to be 850 Series Block and Tackle that is 28.5" long. I do not see that length as being available anymore.

The sash balance I need is same design as your Series 850 Block and Tackle Rod Balance. Issue is your replacement units are not the same length 28 1/2 inches that I need. Do you carry anything that can be used to replace these?No marking except for patent number on one of the plastic pieces 5.737.87 ... (cont.)

I have about 10 windows all with failing Balance and cracking shoes. I would like to repair the windows with new hardware. Can you let me know which parts I need? Thank you

I have several balances that need to be replaced. Double hung til vinyl windows. I hope you can identify. The top looks just like the series 795 channel balance. Thank you,

Part # show (01/3) UNIQUE 27-B-20, but measure show 29, which one should I order? Thanks for the help

It measures 28.5b inches. But I dont see one of this length. I would appreciate if you can identify the part and suggest the replacement parts. Thanks.

I have 12 Barrier Enterprise double hung windows. All have the same problem with the spring balances attached to the bottom portion of the window. The "pivot shoes" are worn and weak, so I believe they may be the culprit. Additionally, a small cap popped out of the window jamb (although I don't k ... (cont.)

Looking for 11 replacement 28.5 window ballist to replace the old broken ballist that we?re in my jeldwen single hung windows . The bottom of my old ballist t is 1?1/8

order #1063322 I just ordered 4 shoes to replace the 1" channel shoe from your web site but as you can see from the profile the area above the shoe on the existing black patriot window lock is only 3/8" (approx) and the swisco version is approximately 1/2" so I can't get the hook at the top to seat ... (cont.)

I need several locking tabs for the top of the window and a half dozen of the counterweight mechanism shown. They are for single hung either Anderson 400 or owns Corning silverline windows

My block and tackle balance is 28 inches long and stamped 28B but the top end has a 1/4" wide hook attached to the string. The hook engages a 9/32" hole near the top of the window channel. >> Do you have a model with a hook or do I untie my hook and use it? My "pivot bar" also looks diff ... (cont.)