Viewing all customer Discussions for:

S770-34 34" Series 770 Balance

Hello, I was wondering if you happen to carry the following attached: the length is 34" and the width is 1/2" Please let me know if you need any more information Thank you,

Hello, I have several builder-grade windows that need their window balances and connecting hardware replaced. These window balances measure 34 inches in length. Also, the spring-loaded clips that allow the window to release inwards. Any help would be appreciated.

Hi,Looking for the channels (34B), pivot lock shoes, and the pivot bars. Photos are attached.Thank you,Steven

I am looking to order (4) S770-34 Channel balances with a 34G stamp. Please let me know if you'll need any other information from me.

Hi, So glad I found SWISCO! I have vinyl windows that use the 770 balance with option 34E and the 15-129 pivot shoe. The windows are about 17 years old and it appears the vinyl/plastic has aged enough to break in many places. When looking at another window to plan my work one of the little sliders ... (cont.)

Please find attached pictures of the parts that I need to replace.The parts that I ordered were completely different from what I needed.Home building completed October 2007 in Columbia, Tennessee Balance Spec:Tilt Windows Stamp on my Balance Frame: 34B BSI THMy broken balance measurements are exac ... (cont.)

I need to replace these ( subject above). My windows (3 if them) are single hung, the removable window is 36 lbs. They are about 30 years old, vinyl windows, and I believe Hurd brand although I dont know if they are still around. The channel balance is not clipped to the side, it is screwed in at ... (cont.)

Hello I believe this balance is series 770 channel balance but the stamp has 34H. I was sure about the weight option for that. It shows it goes up to E on your site.

Help

I need 2 Pennco Window balances. They are 34" long and have a 33C stamped on them. The window weight is 22.5 lbs. What part number should I order or do they have to be custom made. If they need to be made what is the price?Thank you for your time and if there is anything else you need please let me ... (cont.)

I am trying to replace the balances and possibly the whole side track assembly of a number of clad wooden replacement windowsThe plastic receiver has a patent number that is a swisco productThanks for your assistance Cale

I have a single hung window in my living room that does not stay open. I believe the cord is broken on one side of the window. The part says 33TGX with a 15-014 lock shoe. Could you tell me how easy it would be to replace these parts and how long to ship the above parts?

I think this is a 751 series. It has f 33TG stamped on it. The channel appears square. The channel doesn't appear ribbed but this is 40+ years old so who knows. It is 34 inches long. One of the knife shoes broke so this is why I'm trying to find a replacement channel The top attaches with a screw, d ... (cont.)

I'm trying to find the proper balances I should be ordering to replace a few faulty pennco ones. It has the marking 33HD on the channel and I've included some of the measurements I was able to get as well if the shoe. Can you tell by the photos what balance and shoe I need? Thanks for your help! ... (cont.)

I have attached some photos. From what I understand, these are from an old window manufacturer that has gone out of business. I would need at least 6 of them if possible. Thank you!

Hi, The window is roughly 4 feet wide by 6 high. From the ID etched into the lower part of the window it looks to be made by Weather Shield but that's your call on make an model. Will it need two balances? Whichever, one or two, please send price. --bob

Purchased a home here in NC -18 years old. The windows have not been taken very good care of by previous owners and are very loud and squeaky even after cleaning and lubricating. They are difficult to raise and lower and some you cannot lock because the window will not go all the way down. I will ... (cont.)

I am looking for this balance and I am not having luck so far. It is 34" long, 1/2" thick, and 1/2" depth. The part number on the balance us 33A. I have attached photos below as well. Please let me know if you are able to help me out with this. Thank you!

Can you confirm these are your 34" series 770 balances and your Pivot Shoe, 9/16" Thick 15-129? Thanks

I am trying to find the replacement part as pictured. The stamp on the part is 3400 BSI. The casing is 34 inches. The string connects to the base at the bottom. The spring is 14 1/2 inches long. I am not sure of the window brand. Suggestions?