Viewing all customer Discussions for:

S770-34 34" Series 770 Balance

Broken springs on vinyl window need correct replacement parts

I need to purchase and replace the channels on my Pennco window. I have attached pictures of all parts and channel ID info.I believe your 770-34C channel will work - Please confirm if this is what I will need to purchase.34" plain channel, (left channel ID is 33HD / BSI BV) (right channel Id is 33C) ... (cont.)

My channel balances are marked with 34D and look to match your product #5770-34. They screw in with one screw at the top. The shoes are also broken. I have included a photo from a non-broken one that's still in the channel as I am going to have to cut the channels to replace and didn't want to do ... (cont.)

I have a set of windows that need new window balances which I believe are the 770 series. The stamping on the part is 34G (see photo). The length of the balance is 34in and the spring length is approx 19.5in. What would be the replacement part? Also, this is a double hung window (one opens from ... (cont.)

I would like to replace the block/tackle segment of my window. The number on the item is 34 B. Pic of the remains is attached.

33 hd is stamped on the balance the balance is 34 in long no ends the balance is 9/16 wide and 1/2 deep it floats in the wd jamb a bushing keeps balance from sliding down its a penco single hung window made in 2004 16 yrs old

purchased the 34" series 770 balance. I do not see a matching clip. It measures 1" wide 1 3/4" long and 9/16" in depth.

Hello I'm looking for a replacement part to fix one of my Pennco windows; the sash can't stand in the up position because 1 of the springs/balance is broken (see pictures attached).Would you have one of those for sale ?Thanks,

need to replace balances and pivot shoes for tilt in vinyl double hung windows with U shaped channel balances using string exiting from the bottom of balance connecting to the pivot shoe. The U Channel Balance dimensions: 34"tall, 1/2"width and depth. Balance is stamped near the bottom +DB 34C a ... (cont.)

Need new balance's where the string broke, pivot broken and bottom of window pin that goes into pivot broken. Trying to find parts to repair.

I do not have a manufacturer of the balancer needed nor any numbers, markings,etc. Please help to identify what I need to order. The over all length of the damaged balancer is 34" with a width of 5/8".

I have multiple windows with this balance. Building was built in 2004 with SH impact glass, possibly Modern Windows. Thanks for your help.

I need the same balance you guys did for Pennco windows in the below post(S770-34 with the bottom clip swapped out for your 62-105 hook) except I have one sash that weighs 21.6lbs and another that weighs 28.2lbs. I require one for each sash...Can you send me a Quote? https://www.swisco.com/discussio ... (cont.)

Help! Channel balance? Part with spring is broken. The metal part is 34" long05/2 Unique 33-D-40

Hi I need to order 4 - S795-34 (34d) window balances with 15-179 pivot shoes. I actually have the balances but with the incorrect pivot shoes. Do they need to be factory attached or can we attache them to the ones I previously purchased?? Thanks, Jack

There are some damaged 12 year old single sash windows in my condo unit. It appears that I will need channel balances, pivot shoes and snap in glazing to do the repairs. There are 100 condo units in our complex and I am quite sure that others are having problems with their windows as the instalati ... (cont.)

I have large windows with these balances, can you identify these parts and price them for me please? The balances are 34" long. Thanks for your help.

Hi. trying to replace these balancers. Available?Vaughan

Number on metal 33TGX b.s.i 0J 34" long Rectangular Spring is roughly 20.75" Goes in a large tilt Window Two pulley systems right in sash

the markings are 3400 bsi rd. window is tilt. balance is channel 9/16 in width and 9/16 deep. balance is 34 inches long