Viewing all customer Discussions for:

15-150T 1/2" Coil Triple Support

I have a Simonton single hung tilt window with a triple spring balance on each side. Springs are good, shoe is good, the spring housing needs replacement. The housing is 4.5" high x 1.25" wide x 0.5" deep. The springs have #5.0 35" marked on them. Can you provide a part number for the spring housing ... (cont.)

My top window falls right down when unlocked what to do to repair. Also the bottom window locks to the frame a have broken off need to put new ones in

Hello, My window has 3 spring coil and the plastic cover is broken. I would like to find out which part I need to order to replace this plastic cover. I think I need to order this part > 3/8" EGRESS COIL TRIPLE SUPPORT. Please let me know.

Need help identifying replacement parts for these triple spring balances and shoes.

Little white piece with the crack in it. Most of my windows for that part are baked by the Florida sun and cracking SERIES 70007100H-R40-48x72H-R40-72x72AAMA Certified programAmerican National Standard Institute This is all the information I can get from the window. This part helps hold the windo ... (cont.)

4 tilt showsTwo tilt latches 4 tilt pins Let me know if you need more infoMy name is Philip

I need about three of those 3" pivot pins and a couple of those spring Assy units ( I don't know the name of the assembly). Hopefully you can tell by the picture.

I have some Trilite windows in my home with broken springs. They have double coil springs that say, "5.5 33" Pat5232208"on them. Could you please help me select the right replacement parts, I need several. Thanks,George

Hello, I would like to order the replacement parts for my window. There was a metal coil inside the pack that broke. I believe that it's an Andersen window.Please let me know if you need any additional information.Thank you,Mike

looking to buy the sliding hardware, the existing coils are broken. it says #7.5 31" PAT523208 on the coild

I was replacing a broken coil with the new one you sent me and I unfortunately broke the plastic end piece that holds the coil. I'd like to buy two of them please. See the photos for the same piece on the other side of the window. It is approximately 4"x1". I might as well get the bottom pieces too ... (cont.)

Hello, I'm trying to locate the counterbalance covers or the entire unit, but am having no luck finding anything. Can you help?

I order the wrong part for my window this is what the installer says I need. Also can I return the parts I ordered.

Hi, I am looking to replace a Milgard double hung window balancer. Photo attached. Do you carry this part?

Looking to identify this part it's the cover on my window balances single hung window .

Attached is photo of the window pn tags and a good coil cover. Not realizing, wife took screw out of one and it recoiled down and broke the cover on the other side into 8 pieces. Can you help ID?

Hello, we had an issue with our window and it was stuff in an open position. I ordered parts S140-21 from you to replace. They did not work correctly. The lock tab on the window now wouldnt open with the new part so that is damaged now too. Can you tell by the pictures what is needed? ... (cont.)

Do you have these parts for sale? I need two sets, left and right, to repair two Simonton windows. I have the coils already. The window number is 01602968010002.

The plastic cover broke. Can this be replaced?

Hello, I have Amcraft Grand Estate windows and one Of the coil balance springs has broken. I need To replace the spring, shoe, and spring cover. #90 35 is stamped on the spring. 801020 is on the cover. There are no markings on the shoe.