Viewing all customer Discussions for:

15-182 Balance Bushing

Hello! I haven't dealt with windows before, but I am pretty sure I need a coil balance shoe, a double support detention clip, a balance bushing, and a coil balance spring. I would need one of each for the left side and one one of each for the right side. The sash weighs 7.4 lbs. I am not sure if I w ... (cont.)

Please provide price for the coils and hardware shown. I want to replace the coils and hardware for two windows both left and right sides

Hello,I was hoping you could help me determine replacement parts for my window. I would like to replace all the hardware, not just the spring. I need them for both sides of the window please. The window is 14 lbs. I have included pictures of the broken part and the peg on the window. Let me know if ... (cont.)

Our balancer coils snapped in 3 of our windows and I need to replace all of the parts that are involved. I've included photos of the parts and I'm hoping you can tell me what parts I should order. Thank you in advance for your help.Eric

Hi, I have multiple windows which need their balances replaced. I haven't looked at all of them, but I will probably need 6 pairs. My window sashes weigh about 19 pounds. How can I determine if your hardware (for example https://www.swisco.com/10-lb-Single/pd/Series-140-Quick-Tilt-Balance/S140-10 ... (cont.)

Hello, I am looking for the window coil balance in the photos. The only information about the windows I can find is that of the Quality Control & Testing AAMA Certification Program, Series: 3500, AAMA/NWWDA 101/I.S. 2-97, H-R20-48x78 H-R35*-36x66. And warranty information: MI Windows & Doors 1 ... (cont.)

HelloI'm looking to replace the sash tension assembly on the left side of a hung window. I could not identify the manufacturer, but believe the "pros from Dover" i.e. SWISCO staff, can help to identify the replacement part :-)Thank you very much for your time and support!John

Attached find pictures of a double hung window with Coil Balance Springs. This is one of the top Coil Balance Springs which broke. The Springs are numbered 7, the Double Detent Clip is broke on the top this can be seen in the pictures as you can see both of the springs broke and need to be replaced. ... (cont.)

Have Capital double hung replacement windows that were installed in 2000 - bottom vinyl sash is 28 in. wide and 22 in. high. Window coil balance springs snapped on two windows and the coil springs are 1/2/in wide. If better photos are needed let me know.

After some googling, it seems the part I need will be the coil and support for Capitol windows.Thank you.

Need help on this window balance for replace?

Having a hard time tracking this part down asked a few of my contractors can't seem to find hardware like this just hoping for some type of direction

The sash is 27 wide by 32 high. Only label is pictured.

This part came out of a vinyl replacement window. it's a double-hung 30"W X 61"H.The only markings I saw was an H on the back of the paw (the part that holds the window) and the number 4 stamped on the coil.Any advice would be appreciated.James

I need one left hand and one right hand coil balance. It may be hard to see in the photo but the number "8" is stamped onto each spring.

I have upper and lower coil springs left and right side of window half inch thick no stamp number on spring small window that morning 5 lb

Bottom circular portion is broken

My window weighs 15 lbs and there is one spring on each side. The springs are 1/2' wide and have 932 stamped on them. Two windows are totally broken so I need four springs. Please see attached pics for reference. Thanks, John

I need a replacement coil balance and pair of tilt latches for a window upper sash. The window sash is approximately 30in. tall by 24.5in. wide. Overall window opening about 64in. tall. The only identifying mark on the window is the number a-x7164 on the screen. Thank you!

The entire coil balance assembly has failed in different ways in multiple windows. Looking to replace them all. I think I have an S190 coil spring, but am unsure of the size. It's either a 6 or a 9 stamped into the spring, but I don't know which way is up! It's a 9 when looking with the screw hole a ... (cont.)