Viewing all customer Discussions for:

39-528 14-1/2" Casement Track, Truth

I am looking for a part for a Truth operator. its the part that the window slides on. One picture is the right side that has the part and one picture is the left side that is missing the part. Thanks

I need a replacement window crank assembly as the gears are stripped. The reason they are stripped is the casement window has saged and is rubbing on the bottom of the window frame. Watching a video showed an adjustable pin on the bottom hinge. My windows are about 20 years old and have a stationary ... (cont.)

We need to replace Truth operator #14D800P. There are 4 lefts and 2 rights. My question is the arm that goes into the track must be a square guide to get into the track and does the handle cover and handle come with it?It looks like I need two 39-253-LB, four 39-253-RB and six 39-529. I would also ... (cont.)

I'm the property manager for Altia and we have a window that is missing the entire hinge/bracket/handle on their window. In the pictures below are all of the parts we need (from a similar window). All the metal hardware + the handle and cover are needed. Can you please help me identify the p ... (cont.)

The gear wheel on the outside (shown in photo) and probably inside the housing (can't see it) are stripped on 3 of our 14 casement windows and we would like to replace them. We haven't been able to open them for several years because we can't crank them all the way closed without going outside and ... (cont.)

Hi,We have a casement window with a dual arm operator that has worn out. It is difficult to tell what brand the window is. It has a logo with a letter "A" and two underscores. The crank portion of the dual operator arm has a code 1491-120 B. The long arm has code S-1491-160. The short arm has code ... (cont.)

I wanted to get this bottom part of the window. I attached 4 pictures. The first 3 are from a different window showing the piece we need and the last one is the window with the missing piece. The window is 14.5 wide

Worried about a exact replacement because we NO space under the closure currently Thanks Rob

Trying to locate this operator. Not sure if I need one without a cover a need to purchase a cover separately. The one I need is all one piece. The arm measures approximately 13 1/2 inches from the base of operator. Also I added a pic showing how the extended arm is connected to the sash. It has a sw ... (cont.)

I need a left and right l, I am not sure which one I need. If you could help I would appreciate it. Thank you!

Looking to replace these on four window. Have items in cart. Just want to make sure they are the right ones before I order. Can I use the folding handle covers instead of the type in the photo?39-253RB,39-253LB,Truth Folding Handle with Cover39-375, Truth Folding Handle with Cover39-376. Are these c ... (cont.)

I am trying to replace the cranks in my windows. You guys were very helpful trying to identify the parts. I did not compleate the job as I have so many projects on this new/old house I moved into. I think the parts I bought are not the right ones. I was able to pull the whole thing out and see there ... (cont.)

I am looking for Hurd window arm operator replacements. I have attached some pictures of one. On the one you can make out most of what I am hoping is a part number. Needing to know what part number I need to order as well as how much it would cost. Looking to replace 4 Right (when looking at it from ... (cont.)

I am trying to replace some parts on a Jeld Wen Double Casement Window that was installed in 2012. Unfortunately, all of the identifying information has been taken off of the window and we do not have the original order records. The right side of the casement window is fully operational whereas the ... (cont.)

Hi my name is Matt, I appreciate that you have this service because the windows came with the house and we've had the house for 10 years and I have no idea where to find this hardware. I didn't find or notice any numbers or markings, but I took 3 pictures and I'm hoping you might be able to identif ... (cont.)

I need the parts in the images.

I am looking to replace the operator arm and the bracket on the window. It is a Jeld Wen Clad Custon Casement operator JEL-N-668

Attention Chris

Looking to replace this!

Hello, I am struggling to open/close this window. I believe it's too rusted or possibly damaged component. Please let me know if you have a replacement part of if it's even possible to replace. It looks like it's the encore dual arm product code 39-253LB.