Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

Hello, I have a window that has tilt glass in it and is double hung in a bedroom that when you open it, it comes crashing back down. I believe this might be a balancer issue? Attached is a picture from a good window that works fine. Are these plastic pcs. what causes the window to stay up? If so, w ... (cont.)

Hello!I'm looking for a replacement balance for a GA vinyl tilt window. The window is single hung double pane. The approximate total window dimensions are 42"x70".Thank you, Patrick A.

I need the "balance" assembly part for MI window (vinyl) up/down model. The window is single hung model. The model is called 350 homemaker series according to MI. The broken coil on one side does not hold the window in up position. The window pain size (movable portion) is about 32"x23"Note; on ... (cont.)

H-R35-48x72 Series 325-324 double hung PAT. NO. 5,704,165 PAT. 5232208 #5.5 35"

I am wondering how to replace these springs that are housed inside the window under a plastic casing. There are two per windows to assist opening the windows.

How do you attach the Coil-spring to the shoe Help

I have one window that needs both sash coils replaced. It is a Simonton window but not sure the series. I also need a total of 2 of the tilt latches.Can you help me? thank youJarome

Please help me get the needed parts for my Simonton Balance on a Double Hung Window

Hello, I'm in need of both spring balances for a small bathroom Simonton window. Above the Patent # of 5,232,208 on one coil are the markings "6.5 36". There are 2 coils.The Patent # on the bottom plastic pivot shoe is 5,704,165. The pivot shoe is 1 1/4 inch wide, 1 7/16 inch tall at the center, a ... (cont.)

I need triple coils identified I have uploaded Pictures.

The plastic cases on the coil balances shown in the photos are cracking and falling apart. Recently I purchased a pair of your coil balances p/n S140-11 to try in one of the failed, single sash windows. I was able to get them to work, but had to install the coil assembly further down in the track ... (cont.)

Part number 801020. May need whole new single hung window

I am looking for these parts to repair my window. I do not know the window brand. The channel balance part# 801020 is on the last image. Thank you!

In need of the metal post that is screwed in to the bottom of the window (picture shows good side of window. Other side broke off) as well as the slide block, coils (looks like dual coils) and cover. These are Simonton windows that have tension and unlatch and fold out. Any help you can provide with ... (cont.)

Need a coil sash and the T-bar connector for a Simonton single hung window

Greetings, I find no brand name on the windows or parts. The pivot shoe lock is approximately 1 1 1/4 inch wide by 1 3/8 length by 1/2 deep. The coil is 1/2 inch wide x 35 inches marked with possible part number 232208. Pics 1 and 2 are off a functioning window, pic 4 is what's in both sides of the ... (cont.)

springs are marked #4.0 35" track is 1.25 x.50 looking for assembled cartridges need for 4 windows

There is a t shaped bar at the bottom of the window that goes into the slid on the frame. I need 4 new ones as 2 of my windows have broken the part. There is one of them on each lower side of the window. Thank you.

Window pro s 16csfr1201ans1z971-1984. The only info I can find on window.

Hi, Please help to identify the window's part in catalog. Window brand - Simonton - Double Hung - house built in 2003 on the tag - H-R30 48-80 Series 40-17 P.L. 063-038 Conforms to AAMA 13020and HUD UM 111 The Balance Coil Shoe was broken - both springs at the bottom now (1st picture ... (cont.)