Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

Hi, Jim.Your balance looks like it could be a match for our S380-27 or S385-27, depending on the bottom shoe depth. The Series 380 has a 1" deep shoe and the Series 385 has a 1-3/32" deep shoe. Measure as shown below to determine the best fit. You will also need the 2640 strength option. ... (cont.)

Hi, I'm looking for some parts for some old Alpine window (probably installed in the 90's). Just the metal part of the bar is 27inches long and about 1/2 inch wide (on the side facing the window). attached are photos of the part, and I found a tag (in smaller window as there are none left in the ... (cont.)

Hi:I've sent a couple of photos which show the numbers off of my balance, and the overall look of my balance. My broken balance has a stamp that has 26 9. The metal channel is a hair over 27 inches. From looking at your site I think I need an S385-27. This version has a 27 inch channel with wings on ... (cont.)

Number 2630 stamped. Also stamped smaller is BSI. These balances are over 20 years old.

I just send the pic front & backside pic . Please send me . Or call me please I can replace the order .

I need replacement balancers for Milgard windows. Photos of the original attached. They are 1/2 inch wide and 27 inch long, excluding the plastic ends. The sliding window weighs 19 pounds. They are stamped "26 4 EW CMC 10".

27 inches from metal to metal ends

I have matched up the length and mounts for required new balance. My old balance has no stamp or markings. It is a S385.27. It fits a sash that is 33" wide x 30" tall, vinyl double pane about 22 years old. How do I determine an appropriate stamp number? Thanks Much! David

Sliding window, channel balance, 27". Markings on side: 2620, BSI NA Plastic guide with wings Depth of channel 5/8" With of channel. 9/16"

I need a couple of balances for a modular home, KIMRO appears to be the brand of window. Attached are pictures of the balance, I hope they are sufficient. Thanks, Tim

I had purchased some sash in 2019 and one of them ended up snapping today. I wanted to order a replacement and wanted some help picking the right one. The balances did feel a bit tight and I'm always worried it will snap and I'll end up banging the window shut with all the force I need to apply. I ... (cont.)

27" long

46' by 58' up and down Kinro Window balancing kit. Pictures attached

I need a 27" Series 385 Channel Balance with a sash weight of 45lbs. It is for a non-tilt window and a 1/2" width. Please send me a quote for 50 of these.

House built in 2003. Might as well replace both balances. Plastic "ear" broke off on right-side balance. BSI 2630. Please advise of price for the balances and shipping to 80020. Thanks! Ed

balance is 27", window is 30lbs, marking on balance 26D please let me know what to order. I need 2.

I have 27" balances that seem to be you part number S380-27 except with a 15-004 base. I've included photos of both ends and the only stamping on it. I'd like to buy a pair to make sure they work before placing a larger order for the rest of the house. This window is approximately 22 pounds. ... (cont.)

Looking for replacement part for a single hung window. The sash spring is broken so I would like to verify the correct replacement part. The aluminum channel is 27". I'm guessing it is part number is 27" Series 385 Channel Balance Product Code: S385-27 Option 2630? Thanks Trent

I want both left and right replacements for our Caldwell Side Load Channel Balances along with 2 replacement take out clips. The only marking I can read is "Caldwell 26 4 AR" on the broken balance. The 26" reads along the metal rail only. The window is non-tilt. The rail measures 1/2" width on the t ... (cont.)

Hello! The balancers in my windows are pretty worn down. I am looking to replace them and wanting to be sure I order the correct part. I would appreciate help pointing me in the right direction. Thank you!