Viewing all customer Discussions for:

26-083 Pivot Bar, 2-1/2"

I purchased 15-259, 26-083, 15-255 and S159-07 to fix my Simonton windows but the coil balance pivot shoe does not fit in the opening in the vinyl track of my windows. The video on the your site says it's easy to cut a bigger opening. How would I do that? I do not have a lot of tools. I thought I co ... (cont.)

Based on your website photos I believe I have the part name correct. It is 7/8ths wide. I'm hoping you can make sense of the numbers on the product tag. As you can see in my picture ours has suffered a catastrophic failure. RIP ? Are you able to provide a replacement?

Please can you order me Two (2) replacement coil spring balance assemblies and two (2) pivot bars for PRISM window. Photo info attached. Thank you.

I am looking to replace the right side window 11 lbs coil spring . I am not sure which part number to use from your website.

I have a Simonton double-hung replacement window with broken coil balances on the top and bottom sashes. The windows are approx 25 X 50 and each sash weighs about 15 pounds. I have included a picture of one of the broken units, and a picture of the window nametag. Can you recommend some replaceme ... (cont.)

This is for a tilt out window.

Constant cam pivot tensioner from an older DH replacement window possibly installed by Sears.Only markings are "China" Size is approximately 3/4"

These are home depot windows, require the 2 components each side of the window

I returned Pivot Shoe 15-192 because it has extended rails/guides either side, making it not a suitable fit for my 2007 Simonton brand windows. Please image indicating dimensions of my intact pivot shoe along with image of the ill-fitting pivot shoe. Please recommend a shoe that fits. Thank you ... (cont.)

I need weatherstripping and pivot bars. Unfortunately, I can't see the length of the pivot bars, as I can't get the screws off of the bottom of the sash. Many of the pivot bars are rusted, some completely through. If you have any tips on removing the existing screws, I would be grateful. Thanks! ... (cont.)

Window coil does not work. Plastic part on bottom attatched to coil holding metal window shoe broke. Need parts and instructions to replace please. Thanks.

I see that pivot shoes fit right or left. I need 12 to replace in my three Simonton Windows brand double-hung windows. My photo includes dimensions of the pivot shoe. Please advise which of your pivot shoes might fit my application. thank you

These windows are Simonton company, about 20 yrs old. Need new balance parts, as shown in photos. Thank you

I need the pivot bar and case. The window is appx 20 years old. The number on the case is 8573 853 2A. I hope you can see the att. Pic. The bar is 2.5". The distance of screw to the edge of the case is between 7/8 to 1 " Thank you

tab is broken of pivot bar housing

I need new coil balances and cams.

pivot shoes broken on the windows shown in photos. would like to purchase assembly to replace.thanks

Hi, metal pivot bar for original windows (around 2001). dollar bill is 2.61" wide, bar is about 2 3/4" long.

Hello, I am looking for a replacement tensioner for my windows. Attached are the pictures I have, unfortunately all 4 are broke. Thank you for you assistance,

Hello, I am looking to get a match for a balancer coil that broke. The window was a Simonton Double coil balancer Markings China / 2 / 2 within a circle / 1-12 number dial with the arrow pointing to 4 and a 1 & 3 on each side of the arrow (see attached pic) The pivot shoe has broken and I am look ... (cont.)