Viewing all customer Discussions for:

15-228 Pivot Shoe, 17/32" Thick

I have an American Craftsman series 70. Size52x37. I need a balance coil for the left side (looking out). the coil is supported by part # 801020. Not sure what the lb. coil it takes. Will it be OK to replace just the one side? Thank you for any assistance.

Hi, I currently have the BF Rich Vintage windows installed back in 2002. When I unlocked this one window, the top came sliding right down. I am thankful it did not shatter. Anyway, attached are photos of the parts I need. By doing some re-search here on you site, I was somewhat educated on the n ... (cont.)

On the coil I see stamped "MP" and "90". The windows are inexpensive modern vinyl double hung windows.

We like to know whether Series 161 Coil Balance (8 lbs) can replace the broken unit in the attached pictures. The broken coil unit is 1.25" in width and 0.55" in depth. The vinyl D.H. replacement window (36 inch by 40 inch) with tilt-in sash is manufactured by BFRich Co., which is out of business. ... (cont.)

The lower sash of the window that was installed 10/14/2004 won't stay up. I have taken off the lower window and the coils on both sides are all coiled up on the bottom. I can't figure out what company made the window. The coils look very different than all the YouTubes videos I've watched to get ... (cont.)

Hi - I don't see any markings on the hardware, or the windows :-( Tried to get the best possible pics & measurement.

Hi, My window made by B F Rich cabernet. Window keeps falling and would like to purchase spare parts.

This hardware is from a vertical sliding window, with 2 panes sliding up/down. Total 4 assemblies for this one window. The pictures are from on of such assemblies. I could not find any markings on the plastic casings. The only marking I found was on the coil (see pic) which shows a 9 (or 6). I need ... (cont.)

Hello! I have a Silverline F3 series single hung vinyl window. The window does not stay up. I am sending you a photo of the original set up for the window balances. The 2nd piece from the top is marked 14 (It had a coil in it so there were a total of 2 coils for each side of the window.) Do you hav ... (cont.)

Called Andersen and based on the "SO#" was told they would send me a replacement set of"sash balances, part# 10-8016.5a" I need many more for the apartment complex I own.Internet and your search find nothing conclusive.Based on pic of label, and window... what are the Balances I need? ... (cont.)

I am hoping you can help me with these window parts. The longer piece is broken. It has the number 801030. The pivot lock is still in one piece. No number is on this part. The window would not stay up due to the broken part.

can you identify and supply

Hello, According to the sticker on the window I have a series 325 double hung window with single coil balances. The springs have broken and there are no model numbers on them. Which window balances do I buy?Regards, Eric

The plastic portion that screws into the trim has broken. Looks like a triple coil balance but I'm not sure. I can't see a part number or weight spec either. Any help would be great!

Dimension of this part of the shoe is half inch thick 1 and 3/8 long and 1 and 1/4 inch wide the foot that goes into this coil shoe is very wide according to one of the pictures I showed you so I need it to be wide inside of the little metal piece that the foot goes into the shoe. ... (cont.)

Trying to ID this coil type balance. The closest thing I can find is a roller tilt, they are not the same.

Thank you

Hi, I think my photos match the 26-241 pivot bar, can you please confirm? Do you also carry the matching shoe?

Approx. 20 yr old BF Rich window, 28"x ~48". can't find similar parts on website. The measured depth is 1/2", width 1-1/4". I think it say 6 pounds (maybe 9 if reading upside down), but 6 lbs seem right for size of window??

I need 2 pivot shoes like this and two sash tilt pins Do pivot shoes come with metal attachment shown in picture Thanks so much for your help!!