Viewing all customer Discussions for:

15-029 Winged Channel Balance Shoe, 7/8" Depth

Top and bottom shoe. Looking for the full balance

There are two 30" per window I will need three total

I will need 6 of the S385-29 balances (2850 spring) with the 15-029 shoe.

Looking for 2 custom 2930 window channel balances with a 19-005 top and 15-029 foot. Could you please provide an estimate on time and cost to manufacture? Thanks, Mike

Hello, I have two windows that require new balances. One window is stamped 28C (weighs about 17 pounds) and the other is 28D (weighs about the 29 pounds). The top and bottom guides are the same on each balance, but I am having trouble identifying them. The top guide has the same measurements as the ... (cont.)

Unique 28-B-20 is the marking on the balancer. Milestone single hung series 1000 windows. The bottom foot appears to be 7/8", but the only two choices I see are 1" and 1.xx". It also looks a little different than the picture. What would be the part number I would need? Or do none of these work for ... (cont.)

Hello I've found out some end guide numbers on another site for my caldwell block and tackle balance, and i was trying to cross compare / validate with your part numbers but can't make a match. i BELIEVE i have 15P142 top guide, and 15P122 bottom guide. Do you have a compatible guide? ... (cont.)

could you please help find which is a right channel balance for my home. I measured the old one (broken): channel balance shoe deep 7/8" (15-029?). The top looks like 19-005. The channel width is 1/2", the length 28". I need purchase 3 channel balance and 1 clip 16-002

My balance is stamped ub 22e, it matches the 23" SERIES 380 CHANNEL BALANCE, except that the shoe on mine measures 7/8". Will the 1" wide shoe work or is there a different series that has a 7/8" shoe?

Good afternoon I need to order 2 window 30 inch balancers for my window. The window was made by nuair 18 years ago.

Need a quote for (4) channel balance assys, with a 19-005 top and a 15-029 shoe (7/8"). Similar to S380-27 with option 2640, but with the 15-029 shoe. This is a Caldwell replacement with markings 26-4 GK.

Length of metal portion of channel is 16", 1/2" wide, 5/8" channel depth. Top nylon guide is 1-1/4" in length, 1-1/8" wide at tabs Bottom nylon guide is 1-1/14" in in length, 1-1/8" wide at tabs Overall length of balance is 17". I also need the accompanying sash guides, but all are broken with no w ... (cont.)

The marking is 3640. I reviewed all the measurements and they seem to align with the Series 380. The dimension that is off is on Winged Channel Balance Shoe. The 1" depth measurement is between 13/16 and 7/8" on my balance shoe piece. Will the 380 series work for me or is there another series? ... (cont.)

I am pretty sure that what I need is S380-30 Balancer / Option 2920 Have my order in cart but want to make sure before I hit the trigger. Thanks

Need to find (4) balance rods to match above photos. Length 33 Inches long, number on side 3220 P

Windows are single hung, non-tilt. Metal part measures 29". Need to replace on at least two windows. Internal system came apart but I can see a couple of small wheels, pulley, elastic cord and more.

Trying to find the correct balance/guide combination to match what was removed (2305). The bottom guide seems to be smaller than any I have seen, in particular the 7/8 measurement. Most bottom guides are over 1 inch for that dimension. The top guide I'm thinking 60-508. I have a couple other numbers ... (cont.)

Can you help me replace my window balancers. There is a 34DS stamped onto the metal channel portion of the balancer and this metal portion also measures 34" and then it has plastic parts on the ends which make it a little longer. Pics included.

2840

I have a nontilting window, and figured out that the part that I need is the S380 or S385. It looks like the she is worn down, and the depth is less than 1 inch, by the picture that I upload does it look like S380 which has a 1 inch shoe depth?