Viewing all customer Discussions for:

15-058 Hinge Leaf Assembly

Hello, I would like to get a quote for two channel balance. I understand this is a customer order as it is not available in stock. Below are the specs for the balance. Length: 26" Width: 9/16"

Can you identify this part and let me know if you sell it. Roughly 1.5" W x 1.5" H and is goes on the side of a PVC sash. Dont know the brand.

Good morning. I purchased part# 15-058. I have had a bit of difficulty installing this part. Do you have any "How To's" or youtube videos on how to install this specific part?? I have tried to google/youtube for this exact piece but could not find anything. Any help on how to install this would ... (cont.)

Good afternoon. Hope all is well. I have been on a manhunt to identify this window part. After ultilizing "Google Lens", speaking with people from Home Depot/Lowes and other hardware stores the closest I can come is that this may be a "Window Hinge Leaf". I do not see any labels or engraving in ... (cont.)

I'm trying to find the correct balances for an old window in my house. It has two black hinges on the left side of the window and when unlocked it's supposed to swing to the left. Unfortunately the top of the two brackets is also broken and I do not know if that is going to affect the balance. I nee ... (cont.)

Hi,I am replacing my balancers. They measure 26'', and have a "2530" mark on it. Thanks,Yubo

Would like quote for 13 each left and right channel balance Found earlier post with description of parts circa 1984 Calton homes "One 26" balance with a 19-008 top fitting and 15-025 bottom fitting attached. The balance will be stamped 2530. The balance for the opposite side will also use a 26" met ... (cont.)

I need four of these total. I don't think they are necessarily broken but I at least need one. I thought it made sense to replace the entire front Window unit which is two units the same size mulled together I sent a picture of the unit unfortunately it isn't super clear because it's dark in there, ... (cont.)

Dear experts, My window is non tilt, maybe the 1st generation aluminums. The right side channel balance was broken. The model is 2630 J The left channel is different from the right. I am looking for the right side channel. Thank you so much! Looking forward to your response! Have a great weekend! Si ... (cont.)

I'm trying to identify this channel balance to get a replacement. I can't seem to find it on your site. It's 27" long. It came out of a metal window that slides up and then swings out like a door. Please help. Thanks

Windows were installed around 1989 Marked 3130 J I need to replace both sides of the window Can you advise which parts I need to buy please?

The 2 hinges in the side of the window broken and 10 windows need parts, springs and hinges if you can send parts diagram will be better.thank you

1. Channel series: S385 Channel length: 25 Channel stamp: 2540P Quantity: 1 I need this piece made up with a 19-008 top and a 15-025 bottom 2. Channel series: S385 Channel length: 25 Channel stamp: 2540P Quantity: 1 I need this made up with 19-008 top and no bottom

Hello A lance is 20" long Has 1940 stamped on balance

Hi, The metal part of the balance measures 26 inches. Only the lower half of the window goes up and dowmn and is hinged on the left. There is "2540" stamped on the metal part. There are 2 windows like that, I believe each take 2 balances, but not sure. Please help find me the replacement. Thanks ... (cont.)

Hello, I would like some help with identifying the right part to replace my window channel balance. Windows are single sliding, channel balance is 26' L and 9/16 W. Attached are pictures of the existing channel balance. Also, as we attempted to take the window out, a strip of felt like material c ... (cont.)

Hello folks, I'm working on Windows that pivot from the left side into the house for cleaning. The customer tells me he believes their silver line but I can't find any identifiable marks not even on the glass. Are you able to identify the pivots from these pictures. If so please let me know if they' ... (cont.)

Do you know any repair places in Middlesex County NJ that will install the parts? I will need 4 of each The window is a double-hung (no tilt)

Hi , I am trying to replace the broken window hinge in my house. It is a cottage or oriel window. I probably think it is part of the Sullivan windows which is an old manfucturer. Can you let me the part name or part identifier. Any help is greatly appreciated ? Thanks Srinivas.

Hi there,I am working on a window in a property I recently purchased. I'm not able to identify the window manufacturer so I was hoping you could help with the following issues:The top sash lock (name?) is broken but I am not able to source the right part to replace it. I couldn't even remove the exi ... (cont.)