Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

I read in your posts that the 590CSB pivot lock shoe has been discontinued and noticed your suggested replacements, however my shoe has a white cam versus the blue that were discussed and the depth of the shoe is 1/2", not the 5/8" that was mentioned before. I am considering the 15-046 pivot lock s ... (cont.)

Hi there- I am looking to replace this pivot shoe for my window. The following are the dimensions of the shoe: height - 1 7/8 in width - 1 1/4 in thickness - 3/4 in Can you please help me out with this? Thank you, Alyssa

Found Pella name on window latch. I need parts one window has 28 inch tubes with plastic covers and blue ends. One window has 22 7/8 inch spring tubes with blue ends, I need shoes for these windows that appear to 1/2 inch X 1 1/2 X 2 1/8 and 4 axles. Can you help?

I am replacing my spiral balances because they have failed on 2 of my windows. This issue is they continually come free from the pivot shoe, which is a locking pivot. To make sure I fix the problem completely, I thought I would replace the pivot shoe with the spiral balance, however, I haven't fou ... (cont.)

the rod is 34 " silver...total length 35" looking to get the replacement rod and socket attachment.looks like the 5/8"

These photos are from one window - left and right side. They were very tight to get out and I had to really push them. I'm thinking that theywere possible oversized replacements. The original wondows ( picture attached) were installed in 1981. Thanks for any help.

Need for pivot Pen, Spyro tool Sparrow tool, Pivot pin,

Hi, My current spiral balance has no color. It's 29" long. 9/16" diameter. The window sash weights 22 lbs. Please advise the correct spiral balance color for my window. Thanks

I NEED 12 OF THESE WITH THE BALANCE ROD12 SPIRAL RED TIP 5/8 BALANCE

This part is broke it attaches to window an the rod an allows window to stay up.

.554 OD(9/16 OD); 25"length; red. I need 2 pieces and a charging tool. Could you send me your part# of replacement part?Thanks,David

Reading the other posts has been extremely helpful - thank you!We are moving into a apartment and found the windows have been quite abused. They are Champion double hung tilt metal frame windows. We already replaced a tilt latch on one window and then realized another was in need of repair. The pivo ... (cont.)

The plastic sleeve measures 24 inches the diameter is 5/8 Is 600 series 24inch the correct part?

HelloI have a Mastic window with both pivot bars broken off due to rust. I've tried to pull out the old rusted ones but metal just keeps breaking off more. Wondering if a longer pivot bar (with tip for going into shoe still in wall) could be put on the outside channel of the window rather than insi ... (cont.)

My windows go up but will not stay up. Do you have a spring like the attached that will work to hold the windows up. thank you

I need the charging tool for the 27" series 600 spiral tilt window balancers.

The 3 broken pieces in the attached photos fell out of an American Craftsman/Silverline double hung vinyl window that was purchased from Home Depot in 1998. I believe it was a Series 1000 window. Just prior to the plastic pieces falling out on the sill, I was trying to open and close the lower windo ... (cont.)

34 inch long 3/8 inch diameter. No numbers. No markings. Which one do I need?

Hi, My father is installing 2 windows and somehow managed to misplace the spiral balances. I was hoping you could help me identify the right ones to use as a replacement. The fittings (on the photos) suggest a spiral balance with 4 rods at the end, similar to the ones on your website for the tilti ... (cont.)

I'm trying to repair windows in a 1970's model mobile home. They had pivot shoes shown in the attached photos... I couldn't find a good match so I went with the 15-179 which matches length, width and depth but requires a round end on the sash pivot bar (it seems to me) to fit into them, the one on t ... (cont.)