Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

these are vinyl clad replacement windows circa 1985. double glass with tilt out for cleaning. the grommet that is on the end of a spring and attaches to the window. it slides in the track and pivots on the grommet to tilt out for cleaning. can see in picture 20190520_154146 of broken grommet. even i ... (cont.)

This window has two problems. First the vinyl casing on the bottom has broken, so there is no metal tab to connect into the spiral balance. Second, the part that connects to the spiral balance on the other side of the window is broken. Can this be repaired?

Morning, I was hoping you can identify the two parts I have attached. Please let me know if other info/pictures are needed. Thanks

I need qty 4, dimensions are; - 2" tall -1-1/4" wide - 1/2" thick Also, need qty 4 matching spiral balances 19" long tube, blue tip

Do you carry this attached lower window balance cam? Have attached bar and loaded female end. I need the pot metal bar only.

Hello. I am replacing the channel tube spring. I don't know what pivot shoe to get. I lost the old ones.

Hi,I have allot of windows that have turned into guillotines! I'm just recently trying to analyze how the parts work. From the what I see, have the twisted rods come out of the section below? The twisted uprights have a blue color at the end. What do I need to replace? Thanks for your help.JeffWenon ... (cont.)

Hi , i just got off the phone with your sales rep prior to orderings Balances & he recommended I email my question with photos to see if a solution can be recommended I need to replace the Tilt Spiral Balance in my bathroom ( the other rooms have no obstructions) however there is a slanted wall ... (cont.)

I believe that I have the silverliner 4000 series windows which were installed about 20 years ago. I am looking for some help in selecting the correct parts for my windows.ShoesSpiral BalancersTilt GuardsSpiral Balance Charging ToolThanks so much!Chris

I believe my windows might be thermagard but not sure. I need 4 replacement pivot feet and 4 of the part that screws into bottom of sash with the piece that fits into pivot foot. I'll also need charging tool. Do you carry any of these replacement pieces? Thanks

Can I get this part? Total length is 54 inches.

How do I know which specific size tilt window spiral balance pivot lock is needed for my windows.

Please call me

I have no markings because pieces are totally missing. I'm sorry I hope you can help. It's the back window of a fold out window. The window in the front is fine, it's the back upper window that holds the window up that the pieces are broke

How do you know if a balance is bad and not just not adjusted correctly? Thank you for your time, Peter H.

I need some help finding the replacement part for this window please

I need to replace 2 balancers on a window. They are 28" long. I also need the tool to adjust them.

I have an 18 lb. window that uses 28" spiral balances that are 3/8 inch thick. The tip looks to be orange, however in this series the only options are red and green. What do you folks recommend in this instance?

I'm sending pictures and measurements for you to look at so you can identify them for me for a window that I'm working on. The spiral balance measures 30 inches from top to bottom and a diameter of 7/16 inches. The part that it attaches to measures 15/16 inches wide, the height is about 2 1/16 inche ... (cont.)

My pivot shoes have red turning centers. I didnt see that color option/size?