Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

There is a metal spiral piece inside of a plastic sleeve about 1/2 inch in diameter. The part that attaches it to the window frame is plastic, too. It is almost 30 inches long.

Need pivot shoe located in photo

Please look at the image attached

I need to replace the balance spring holders on two of my windows. I am assuming the balance is still good but please price and advise if I should likely replace. I have attached the window seal for manufacturer and model numbers.

The tip of the old balance looks white? Length is 31 in 5/8. Weight of sash is 26.5Will the blue tip last longer than the red (or am i being too picky)Sincerley, Mike

Need to purchase 4 balance springs.The tip is yellow.Not certain what length to order. Would assum 31".Please supply part number to order.Is the slide/lock block available? Will purchase several of them, just Incase needed.ThanksRay

I'll be happy to send more pics. Looking for two new springs (window balance) and plastic hardware keeper for left and right side. I measured and got 33 3/4 " spring. These are for a tilt window. Thank you

My name is MarkI emailed you a few weeks ago and have not heard anything.Mark

I need a replacement pivot shoe with measurements like your no. 15-118. The only difference I see is this one has a blue cam whereas mine has a black cam. Does that make a difference? I will be using your pivot bar 26-083 and a new spiral balance S600-25 blue tip for a 25lb sash. Thank you ... (cont.)

My windows are 20 years old I am sure these windows are builder grade I need to replace these springs on several windows The only markings I see on window is at the latch It shows MW Thanks Jim

I talked to your customer service representative today and she suggested I email you this picture. I need to replace the balances for my hurricane windows. The circular case is just over 37" long and the metal spiral part is just over 37" long. It appears to be black on the end. The windows are ext ... (cont.)

I need a spiral balance (red tip) and the pivot lock shoe. The window is a Vinyltech 2000 SH. The spiral balance is 28" long (no red tip) and 5/8" diameter. I think that's the S600. The pivot lock shoe I'm unsure of. Also, do I need a tool to wind the spiral balance?

Patriot windows balances and shoes Measurements. Each window has two balances and two shoes One on each side The length of the hinges or spiral are 41 1/4 I have to make the assumption it's 42 we could not see all the way to the top. The diameter aproximally 5/8 color tip is red The shoes are 1. ... (cont.)

Have a few single hung windows need part window rotates on and the rail that connects into clip

I sent a communication on this subject using your 'contact us' website utility. My name is John Peterson and I received the wrong size pivot shoes for my window. The pivot shoes I need are shown in the photos attached to this note. Please tell which pivot shoe I need and how I can return the ones ... (cont.)

My window got disconnected from this part in the track and won't stay open or tilt out. Can this be replaced? They are patriot windows built by Ryan Homes

I have a tilt window and the window does not stay open when lifted. In addition window does not sit in the base of the frame. I measured the bar piece and it is 29" long. What other pieces do I need to orderthank you,Marlene

Do you have replacement parts for these, it's 2" tall x approx 7/8"

Have some other parts in my cart. Not certain about which pivot lock shoe this is or if I need a new one. The side mount pivot bar is broke, part of it is in the lock shoe, but can't find this on the website.

I have a windows that don't stay open. It has spiral ring inside the cylinder and need for couple of windows