Viewing all customer Discussions for:

S390-17 17" Series 390 Channel Balance

Looking to purchase these type of balancers. Not sure about making correct selection from website.These are non tilt windowsforgot to add 1/2 channelMeasures 23 in and 17 inRegards John

I need to order 17-8 balances. What is the corresponding code for this size?

We have several channels that need replaced. These two are 2830 and 1640. We are hoping they can be replaced.?

Stamped with part no 2430Al channel is 25" long. Hook is broken off the end of the spring. Need entire assembly or just the spring?And I have another pair stamped 1620 with an AL channel length of 17". This is the 1620 but they look the same.

The first three pictures are 25" x 1/2 (2440) , the last two are 17" x 1/2" (1630). Before purchasing I saw several that looked alike and I want to make sure its the right ones before purchasing .

Picture of balancer included. Also need grid clips for the munton grids-Picture included.

Thinking the S390-17 is the one??. Your thoughts?

The house was built on 1985, the windows on the picture, the springs have some # 16 CP and other is 28 CP

My home was built in 1991 and I want to replace the channel balances for non-tilt windows 1/2" wide balances total of 14 windows - 2 balances for each side so a total of 28 balances.I don't understand how to translate your product number with my channel balance numbers that I located at the bottom o ... (cont.)

Hello I am trying to procure 4 replacement channel balances for a double hung sash bathroom window. Attached is the picture of the balances. There are no number/letter markings on the rail. The rails are 17" in length. You can see the stops in the photo. From your site it looks like item# S3 ... (cont.)

I Believe these are S351 channel balances they're stamped 16B but when you measure from metal edge to metal edge I get 17 inches so I don't know which size on the option chart 16 inch or 17 inch. I am the homeowner bought these in 2003 when we built the house I have other windows that are 23 27 28 ... (cont.)

I have some block & tackle non tilt window one stamped 2820 measures 29inch long the other is stamped 1620 measures 17inch measures 17 inch long can I just order them by the stamped number and get them complete with the shoes?

What series do I need for my type of channel balance. I have a few different size windows. They have marking of : 16 2 28 3 28 4 28 2

Hi I am looking to buy window channel balances and all other hardware required to make the windows fully functional. There are 2 different size channel balances we need. One has a marking of 2820 and the other is 16B. I have attached photos of the 2820. The 16B looks identical, just shorter. ... (cont.)

I just remove these two, what I believe to be, channel balances. It would be great if I could get replacements. I believe they are 17 inches long.

Two channel balance for larger window appears to read ( #22DS 40L) . Four channel balance for two smaller windows appear to read ( #16D ) . I'm sorry but those are the only markings that I can find . I hope this helps..

Hello SwiscoHere is the part number for the windows in question.I need replacement part for the window spring and lockMellaThanksMella

need help finding the correct parts for windows. Have more pictures or could ship the parts to you.Need 4 of the longer ones and 26 of the shorter ones and 30 of the small white pieces.

Hello.... I would like to replace the channel balance in my aluminum framed windows. The windows are NON-TILT windows. The original channel balance devices are stamped "1640" and their length is 17 inches (metal part only). I have attached 5 pictures of the original channel balance devices as th ... (cont.)

2 windows Part 1 2420D 25" Part 2 1620D Length unknown can't get to window would it be 17"? Both have same ends (Photos attached) 1/2 channel width