Viewing all customer Discussions for:

S795-33 33" Series 795 Channel Balance

Plain Channel measures 33" vinyl window 33 wide x 35 1/2 high Window weight 27-30 Pounds channel stamping 32-7 see photo Resembles S795 Shoe width 1.25" Open cam need one only regards. George

Hello, I'm looking for a 33" Series 795 Channel Balance (33B) with the 15-198 Balance Clip already attached, as opposed to sold separately. I need the same thing for a 39" Channel Balance as well. Thank you for your help!

Hi, looks like you guys can help me but I wanted to make certain you had all the parts. I need the balance and the shoe but I also need the metal piece that comes out of the window. That piece is a 2 1/2 inch long metal channel that is about a quarter of an inch wide and is what fits into the shoe. ... (cont.)

I believe I have a S795-33D but mine have a hook instead on a screw in. Do you have one with a hook?

I have Louisiana Pacific tilt windows. Bottom bracket broke, it is approximately 3" in length. Looks like the shoe is broken also. Measures 33" in length. Series 795 channel balance looks like the correct part. Can you please advise based on the attached photos if this is the appropriate replac ... (cont.)

Please help identify the channel balance. It says 25 5 bsl pp

I purchased 2 channel balance order number 1384120. I think I need the clip in not screw in. I have uploaded 4 pictures 1 is the hole that the clip goes in and 1 showing how the clip in inserted into the hole on another window and the other 2 pictures are the balance channel I purchased from you.Can ... (cont.)

Hello,I need replace the 2 Channel Balance and 4 Pivot Lock Shoe window. The part number that I found from the Channel Balance is 27B BSI 1-1/4 wide shoe. The Pivot Lock Shoe that I have has 3 differently PAT numbers. I could realize one of these in witch is PAT D467490 and the 2 others I couldn't g ... (cont.)

Hello, I'm working on a house that I'm renovating and found two left side channels that that have broken parts that hold the spring both top and bottom. Could you tell me what I need ? And most important do you have an replacement. This is a single hung tilt out window. The spring is 18" long and t ... (cont.)

Good Morning SWISCO,With reference to below order;The Balance Screw Plug would not work with my application. The window frame was too shallow and did not allow the screw to penetrate far enough to expand the plastic clip and make a tight connection. It simply would not hold in place and I do not wan ... (cont.)

33D is stamped on side of channel Foot is 1" Length 34" Also a hook at top not a screw

My channel bar has 32-5 stamped into it but I don't see that listed as an option.

32-7 on the back of the bracket measures 33in. vinyl windows from Home Depot no names on the windows

I need 8 32-33 D balances, how much would each balance cost please, thanks

Hi, my original one need clip instead of screw in like the 33" Series 795 Channel Balance (33D), can you custom made with clip on like my original one shown in picture. and how much? I have ordered the balance and is there anyway to replace the top with clip myself instead of custom made new one? ... (cont.)

HiI'm in need of Channel Balances, Balance Shoes, Mounted Latches for Tilt Windows. I can't find any part numbers on them and I don't want to make a mistake and order the wrong one. Pictures are included and I can take more if needed. Thanks Bob

Greetings! I am looking for some replacement parts for builder installed Silverline single hung tilt windows. I've included photos of the parts needed, the measurement on the metal channel for the counter-balance is 33" from end-to-end, 1/2" wide. The window channel that the counter-balance sits in ... (cont.)

Manufacturer unknown. upper part of window is immobile. lower sash goes up & down, & tilts out. it is connected to the channel balance along its lower edge. the spring in balance was attached to plastic piece of upper end of balance, but that piece has broken. spring length is 15 1/4". balance lengt ... (cont.)

Good morning, the assembly of one of the helper springs has broke and my window will now not stay in the up (open) position. Unfortunately I could not find a part or manufacturer number on the assembly, if their is any recommendations or if I can purchase one from your company it would be greatly ap ... (cont.)

I would like a quote for 2 channel balances - the description is as follows: Length - 33 inches end to end excluding hook and t-lock Size - 1/2 inch Weight - 13.8 lbs Ends - 1 1/4 T-Lock and Clip attachment. Current balance is off a Paramount single hung window - only number reference is 33A ... (cont.)