Viewing all customer Discussions for:

39-348 Sill Mounted Awning Operator

This is a 25 yr old Caradco window. Abt 18x18. The crank has pushed out of the housing. The arms go to the left and right. I need a replacement.

Hi, With pics attached, Is your product 39 - 312 the correct replacement for this application. The connections and crunch look a little different. But I may be able to work with your 39 - 312 if this looks good from your experience, Craig

Hola necesito unos roto operador para remplazo, son antiguos de ano 2000 te envio numero de partes: AB Izq. 4.241.541 Marca Verdad hijo 8 AB Der. hijo 4 AB Proyeccion N? Part. 4505601 son 8 Entry Gard serie 15 espero que me puedan ayudar gracias saludos

Please help we need to find a replacement dimension 24 5/8 inches with a solid base

Hurd casement window, dual arm, 9" arms. Need replacement.

Need a replacement operator for this awning window. It's a Truth operator.

Left arm is stamped truth 40011, right arm 40012. Looks like I will have to remove the wood over the mechanism to access the screws mounting the mechanism to the sill. Looking at product code 39-348. Is that correct? Will I also need the operator cover 39-107?

My hardware that needs replacing is Truth 40012 marked on both arms. The areas are 11 inches, the bar across the top is 27 inches and the handle base is 5 inch. What do you suggest? Thanks

Hello ~ I have a broken awning window for which I hope you can provide replacement parts. It is a WeatherShield 8204 Aluminum Clad Awning, installed in 2008. The window was yanked upward when partway open, twisting the operator arms and pulling the guide bar off the awning's interior wood frame. ... (cont.)

Need help finding replacement awning window assembly. When folded in the closed position arms measure 24 5/8 inches. Steven

I'm looking for the clip that holds the arm to the sash in this 1980s era window.

hi my name is Jim.the gear part seems to be stripped on our Jeld-wen awning window.marked on the window JEL-N-201Caradco is on the handle.Truth is on the arms.it's a 2 arm setup.probably need 2 new arms - due to threadsthe operator and handle -- as the handle is one piece.see photos.also .. I can't ... (cont.)

Can't tell if it's an Anderson or not

Sorry for the delay. I don't know if you have just the parts I took photos of. I don't need the whole operator. I've attached photos of the parts, and I don't really think I need the handle, but it's in the first photo. Also, I've included the PDF from weather Shield; pages 1 for the exploded view, ... (cont.)

I have this casement window which swings bottom-out. There are two arms that sort of sizor out. The crank seems stripped and just falls out.

I need a replacement operator for a Weather Shield awning window which was manufactured Dec 1990. The worm gear has come out and I cannot use the mechanism to close the window. Thank you,

hi, here are the dimensions : window size : 39" width x 27" height operator arm length (2x) : 14" slide bar (affixed to lower inside of window) : 35"

Hello, I'm having trouble removing the cover from the old operator. I just wanted to quickly replace the cover and the crank, but it seems to be stuck. Additionally, one of the window arms is no longer connected to the pin, and I am having a hard time closing the window. Could you please point me t ... (cont.)

Hi, I am trying to replace this awning window operator. The handle comes right out with the insert connector. It is stamped Truth on both arms, but I see no part numbers. There are two arms that are about 10 inches extended fully and about 23" when closed. The window dates to 2008, if that's a ... (cont.)

Hi, I would like to know if you carry this operator. It is a dual arm. Arms are 9 in. long. It has a screw in retainer plug with two flats. One side of the retainer plug that holds in the threaded shaft is about .622" while the other is about .685". The threaded shaft looks like the shaft/stem f ... (cont.)