Viewing all customer Discussions for:

15-198 Balance Clip Attachment

I just placed an order for the S795-34C part I thought would work in my window.I am noticing a few little differences though... It looks like my cam is an open cam and I have a hook for the top. I want to make sure I ordered the correct part and/or see if I need to add any additional parts.Can you h ... (cont.)

I am looking for the correct part number to replace these balances. Milgard told me the part description they use and this is placed in my subject line. The window itself is a double hung W 29" x H 24". The photos taken are from a good window so I did not remove the balance. I am hoping it still giv ... (cont.)

I looking for this part for mine windows

We have 3 vinyl windows Apx 18 yr old. that will not stay open due to broken parts. Lower window tilts in for cleaning and removal and top window is fixed. Need information to replace the balance and sash. Lower window weighs between 13-19#. The metal channel that allows window to slide is 28" leng ... (cont.)

I have a condo that was built in 2004. It has 4 single hung vinyl windows. 3 of the balances are 34C and 1 is 28B. They all hook in at the top instead of screw. The window channel that the balance slips into is 1/2"wide. I want to replace all of the balances and a couple left and right tilt latch ... (cont.)

Looking to replace a balance channel for an American Window BR250 tilting window. It seems the bottom faster broke.

Hello,I need replace the 2 Channel Balance and 4 Pivot Lock Shoe window. The part number that I found from the Channel Balance is 27B BSI 1-1/4 wide shoe. The Pivot Lock Shoe that I have has 3 differently PAT numbers. I could realize one of these in witch is PAT D467490 and the 2 others I couldn't g ... (cont.)

Looking to identify these for replacement measuring 34 inches long, and window frame marked arrow space 2006.

Hello, my David Weekley home was built in 2009, and the windows are tilt type. Yesterday while cleaning the windows in a tilted position, the pivot shoe cracked, and the balance came down. Can you please recommend what replacement parts I need to have this repaired? Thank you!

I am looking to order (5) balances with a 15-194 shoe and a 15-198 hook.

Good Morning SWISCO,With reference to below order;The Balance Screw Plug would not work with my application. The window frame was too shallow and did not allow the screw to penetrate far enough to expand the plastic clip and make a tight connection. It simply would not hold in place and I do not wan ... (cont.)

I have MW double hung windows that are about 14 years old. They have a 36C BS1 channel and one window is completely broken, some are struggling to go up and down. One channel balance is broken in 3 places so I think it is best to completely replace it. It however has the hook at the top. My questio ... (cont.)

Hello - I need to replace two window channel balances but didn't see any on your website that match mine. Thanks, Carissa

33D is stamped on side of channel Foot is 1" Length 34" Also a hook at top not a screw

Good Morning i have three windows with bad pivot locks that i can't find a part number for. To replace everything i believe i need six of 15-194. Six of S795-27 custom made with the hooks at the top. and finally three of 26-243 and three 26-244. I just want to make sure that this all looks right bas ... (cont.)

Hello, I am looking for a window balance with a 28C stamp. (9/16") that works with a 1" t-lock. I was wondering if you could help, thank you. As a side note too.. I will need some 1" T-LOCK BALANCE SHOE, CLOSED CAM Product Code: 15-194 as well as the old plastic ones broke too. I need the serie ... (cont.)

I have a 3 sided metal channel 18" long 1/2" wide and has 18E stamped on it . It uses the 15-194 balance shoe and the part on the end of the string that connects to the jamb is a hook that lives in a slot. These are Pella brand windows. Can you help me with the correct replacement part number?Thanks ... (cont.)

PAT AB10108 Or PAT 4810108 Very tiny writing 0006199 only one has this number

Requesting two balances with 15-198 hook and 15-194 T-Lock shoe. Stamp option 28B.

I have a BSI 28c block and tackle tilt balancer but the top clip is not a screw in.