Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

Hi Swisco Team - I have a coil balance, single sash window. The coil is disconnected/broken on one side and the shoe is broken on the other. I *think* I've narrowed down the spring to a Series 160, 6.5lbs, and a 17/32" 15-199 shoe. I'm lost on the top plastic block part.

N/a

Embossed on plastic Pat# 5,704,385 530

Hello Swisco Here is the part I need please. If I measured correctly, here is what I got. 1 1/4 wide x 17/32 or 9/16 deep x just under 1 1/2 long from the arch at the top. Looks like it matches Product Code: 15-177 Please let me know to place the order. Thank you. JPG

Good morning, I have a customer with discontinued windows who needs his balances replaced as soon as possible. I'm on your website, and I'm just unsure how to find the replacements I need, because I'm unfamiliar with this type of balance.The top part has a 3 on it, the bottom part has a 2 on it, the ... (cont.)

Hello, Looking for replacements for my current coil balances. Thank you!

No serial numbers, just what looks like a P made out of dots

Hello, I have tilt windows at my house. The balances need replaced. See the attached pictures. I had 3 coils together on each side. The coils have printed on them #4.0 35" P. I was hoping to order one of the 140 quick balances that are already together as one unit, but I am unsure which weight to ge ... (cont.)

I think I need the balance parts

The balance shoes on the top window are broken. 3/4 inch opening in the slot.

Hello i have this small Simonton window that needs the coil balances replaced. Not sure what info i need to get the part number or if its even fixable . And I also provided the measurement for the tilt latch. It is 2 7/8 long.

I have a customer that has single sash tilt windows and needs several window balances replaced. I'm familiar with channel balances, but I have not encountered these types of balances (see attached photos). If you can, please identify the balances and offer possible replacement parts if available. ... (cont.)

2 coil window valance Pat# 5,704,165

I need to buy new parts so that my window stays open. I need to replace the coil and upper and lower "shoe". I need help with identifying what parts I need. I'd like to buy a whole assembly if that's possible or at least all the parts piecemeal so I can fix the window. I need left and right parts. ... (cont.)

I need pivotal lock shoes for the window model I uploaded

Coil is stamped #10.0 35". Does that indicate its a 10 pound coil.

need help identifying the coil (the only stamp that is legible is #6.0 35"), Pivot, and pivot shoe. The inside of the coil cover has a 3/8 dual stamp as well.

It looks like I have a Triple Coil Balance System for my windows.I need parts for 10 windows, of course, entire works for both sides, assembly, coils and shoes.It looks like I have a single hung vinyl window. Sending two pictures of the shoe, is 1/2 inch thick........3/4 in wide.......1 3/4 ... (cont.)

Looks like the spring broke. Do you sell a replacement?

I have a cracked window pivot shoe that needs replacing. This bit attaches to a coil where the other end is connected to a part that has the numbers 5.232.208.