Viewing all customer Discussions for:

26-378 3" Pivot Bar

The existing and missing is .5" x 1.25". on all windows, which are from the same batch. So the base shoes, base pins are the same. I have 2 lower sashes, 15 lb each. Can I get coils (4), base shoe (4), coil covers (4), pins (4) I have one lower sash, 18 lb. Could I get coils (2), base pins (2), ... (cont.)

I ordered item #26-336 to replace the pivot bars on our simonton windows but they did not fit, the bars stuck out too much to fit back into the tracks. what part should I order to replace my pivot bars? the bar is broken and bent but measured about 3" 5/8

We have Plygem windows from about 2012. A few years ago the windows were tilted out without the window being lifted and parts broke. One of the smaller windows stills has a 3700 sticker series. But the windows I am interested in are slightly bigger but bought at the same time. I have also found atta ... (cont.)

Hello, I am in need of parts to replace my bathroom double hung broken window coil balance. Please let me know which part I should order. For the steel coil, how many I need to order. Not sure if just one or two or three. Thanks. Kevin

unable to identify part number of window - the windows tilt out for cleaning - was told by the company that installed the window that they were Anderson windows but no one at Anderson can identify the part and the company refuses to provide the manufacturer's name - says they don't have my files. T ... (cont.)

I am having a hard time finding replacement pivot pins for a double hung window installed in 2015. Manufacturer: ViWintech. No response from the manufacturer and the installer has been no help. Thanks.

Number on the carrier 590 Pat#5740165. I was also wondering to the replacements come with the springs or are they separate?

I do know that I need 15-199 pivot shoes, I do know that I need Series 165 coils, but I dont know the balance....please help me. Based upon what I have learned from your experts, I think in a lot of my cases it is just the coil cover/retainer that has dry rotted, and the coils and shoes are fine. ... (cont.)

Hello, We have a couple of Silverline windows that will not stay open and the latches are broken. The windows are 29.75" x 61.25". Would you be able to tell us what parts we would need?

Trying to find some window balance parts for a Simonton window .

Need both tilt latch Both balance assemblies and shoes Coils have 5.0 35 ? One pivot arm

Need some window pins. Couldn't find them on your site

I can get the window model info if needed.

The house we recently purchased has two different eras of tilt windows, half from the mid 80's, the other half from the early 20's. The older windows use a spiral balancer system while the newer ones use the metal coil system. (see picture) Is it possible to retrofit the older windows using a newer ... (cont.)

I need a Half a dozen Sash pins that engage the window Balances. The original window is the Lockheed Nucon DH. They are approx 3"long the end is T-shaped.

Hi - I was wondering if you could help identify which pivot bar I would need as a replacement. It appears to be 3" long with holes for the screws at 1 5/16 inches and 2 5/16 inches. I'm not sure what brand of window they are and can't find anything other than the second picture attached to help ide ... (cont.)

Do you have the replacement for this? Mi window series 1450

I use this shoe: https://www.swisco.com/Coil-Balance-Pivot-Shoe/pd/Tilt-Window-Replacement-Pivot-Lock-Shoes/15-180 I need the metal part that screws inside of bottom of window to hook into shoe.

Hello. I am looking to find a pivot pin the same as what's in the picture. The width of the pin seems to measure 9/16" and the height is 7/16". The length is 3" and the distance from the pin to the closest to the farthest away hole are, 1 5/16", 1 1/2", and 2 13/16" respectively. ... (cont.)

I have some 20 y/o Roma Therm windows that need new balances and pivot bars. Here are some photos of what I have. Can you recommend replacement parts? the windows do not have cut outs in the channels to take out the broken pieces. Is that something I can cut into the channel? When I order the pa ... (cont.)