Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

I have a nuair window that need a set of sash clips and balancers. the number on the balancer is a B 2830. I will attach picture with my sash clip and balancer ends. Im having trouble sending my picture though your site. Am I doing something wrong? Should I try to send then as a smaller file ... (cont.)

It's a 29 inch metal channel that appears like 19-005 top and 15-005 bottom. The stamp on the channel is 28 5 HR Caldwell. Will this correspond to 29" SERIES 380 CHANNEL BALANCE with 2850 option? I'm presuming that the stamp 28 5 HR Caldwell corresponds to 2850 option that corresponds to 28 to 32 ... (cont.)

I find this number 28 4 CALDWELL LM

Hi,I would like to order a pair of channel balances. The current channel balance indicate 28C inscribed on it. It is half an inch wide and 29 inches in length.It's for a non- tilting window. It seems like S380 or S385 but is not sure about the shoe. Based on my measurement of the shoe it's 30/32 of ... (cont.)

Stamp option says 28-1... The window sash is non impact 1/8 glass

Need to know a part number so I can order some replacements. Thanks!

metal is 29" plus additional with plastic - its 1/2" wide marked 28C wings top and bottom please help!!

Hello - I seem to be missing a part on one of my windows. It appears to be a small white plastic guide. One of the attached pictures shows it on an adjacent window and the other shows holes where it apparently fits. The opposite side of each window has a long covered guide that I believe hides a spr ... (cont.)

Broken part the only number provide on hardware is 2830

I am attempting to replace 2 balances;Non tilt window1/2 inch channel widthaluminum frame of balance is 29 inches long1 balance has 28C stamped on it, the other has 28Ewindow pane is 48 1/2 inches wide, 28 inches longOriginal window from builder Lennar, house built in 2002Will also need capsFrank ... (cont.)

I am needing help ordering the correct Channel balance as well as shoe attached and top attached could you please contact me at your earliest convenience.Thanks,Kevin

the channel is 29", spring is about 14", window is single hung lifts up and in to remove window. installed around 1997.

Want to make sure I'm placing order for correct balance. The stamp on my existing balance reads, "29 3 AQ CALDWELL". Could you please identify correct replacement balance.

I have a window balance. it has "28D" stamped on it. There is also another stamp that says "UB 28D" I measured and just the metal track measures 28-5/8?? The channel is 1/2"(9/16). I researched and came up with a 15-029 Shoe and a 19-005 winged Channel Top Balance, however i'm open for your expert c ... (cont.)

Rod is 29" metal end to metal end 9/16" wide1/2" deep1/2" IDMarked 28B

I have a window that measures 58x32. There are 2 different size balances when I took the bottom sash out. I don't know which one is the correct size? In one of the pictures I measured from the bottom of the window to the top of the bottom sash. I also measured the width of the side jamb to make sur ... (cont.)

Good morning,We are trying to replace some channel balances in our window. Our current balance has 28C stamped on the side, the metal channel is 29 inches long, and it weighs approximately 27.2 lbs. Should we purchase your replacement part S380-29? Also should we purchase the 2840 or the 2850? W ... (cont.)

Please identify Channel Balance. Manufacturer of window is Aluminum Extruders International. About 12 years old. 28 inch length.

I'd like to get a recommendation on which channel balance to purchase. This one is 29 inches long and has a 28 D stamped on the front. It also appears that there is a C stamped over the D - maybe. Most of ours have the string/rope broken, so I would prefer something that will last longer than wha ... (cont.)

I need 29inch but do not know which option to pick? The only number stamp i can see on my broken one is ?28B USB?