Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

CWS non-tilt windows.Track is 1/2"Shoes and tops have wingsShoe is 1-3/32"Metal channel is 30"Stamp on channel is 94Window weight is 28.4 lbsI also need 4 plastic sash guides, as they were damaged when the balance failed. See pic #1.Thanks!Bobby

We have 8 Milgard windows that are 36" x 62" and 1 that is 52" x 62" and want to replace the balancers in each one. Would you please provide me with the part numbers? Thanks so much for your help with this!

Printed Number on balance rod ; 20 3 LW CMC. 11 Metal rail dimensions: 30 inch long , O.5 inch wide , O,5 inch higher

Current balances have a 29D USB on them. Which part number do I need?

I am thinking they are the 380 or 385 but not sure how to measure the difference. The balance measures 30" long. They are going in heavy single pane hurricane windows in FL. Thank you for your help!Adam

Markings are 29 3 Bsi 03 Part is a 1/2" wide and 30" long

I'm John, Please let me know the cost to receive 4 rods. Length: 30 inches

Please confirm appears to be Swisco part no 380 2975.. Metal is 30 in long and 1/2 in wide. Ends have wings that fit in window channel. Please advise if questions.

Kindly advise which balancer I need. Please find the photos showing the window label and stamp on the balancer. The measurement of the existing balancer is the length of the metal channel. Thanks

The length is 29" ( 30 actually) and writing on the part is 29 3 BX CMC 10 Thank you very much, look forward to hear from you

Hello, I have a window balance that broke and I am trying to find a replacement. The balance is 30 inches. Thank you!

See photos for marks. These are about 20 yrs old. I need 10 of these with the winged ends. Also need the plastic caps that go on the window since that is what broke and popped these out.

I'm looking for new channel balances & Sash Guides for three Lawson Hurricane Windows. Two of the windows are the same and have imprints on the current channel balances as follows: 35DS 55L - I removed the window and it weighs 54.4 lbs. The channel balances look like your, S385-36; however, they ... (cont.)

Looking to identify this balancer. Has a 2960 BS1 stamp on it. It is 1/2" guide. Not sure the difference between the S350-S395 are?

Hi ! Awesome service, btw. This is a half inch balance that is 30 inches long. As previous customer, I replaced top sash guide in same window with your part 18-166 (if that helps). Units in pictures is inches.

Metal is 30" long

Please help identify the window balance (the whole assembly) The length of the metal housing is 29 7/8" The marking on the metal housing is "29-5 HA2 CMC 7" Thank you!

I have 3 the same windows 30" channel balance 29 5 EW CMC 10 stamped is there only 1 per window? What side does it go on. Does the window come out? Can you send me how to install it

Thanks for your help in getting me the correct parts. 30"rod, stamp = 2950. Metal framed non-tilt windows, will need 2@ = 4

I'm trying to verify a replacement part for my non tilt window balance spring. It measures 30 inches long. I believe it's a half inch. Photos included.